valutazioni - 3, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
To set up your TV’s wired network connection automatically, follow these steps: 1. Go to the Network Settings screen. (Network > Network Settings) 2. Select Start. The network test screen appears and verifies the network connection. 3. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online services, please contact your Internet service provider." message appears. Select OK. N If the connection process fails, check the LAN port connection. N If the automatic process cannot find the network connection values or if you want to set the connection manually, go to the next section, "Manual Network Setup." Manual Wired Network Setup You can configure your TV's wired network connection manually when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To view the Network connection values on Winows XP computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. To set up your TV's wired network connection manually, follow these steps: 1. Go to the Network Settings screen. (Network > Network Settings) 2. Select Start. The network connection screen appears and the verification process starts. 3. Select Stop. The verification process stops. Select IP Settings on network connection screen. The IP Settings screen appears. 4. Select the IP Mode, and then set the IP Mode to Manual. 5. Go to the IP Address entry field, and then select the IP Address using the remote. 6. Enter the first portion of the IP Address (for example, 105) into the first entry field using your remote. When done, go to the next field. 7. Enter the next portion of the IP Address. When done, go to the next field. 8. Repeat the entry process for each field in the IP Address. N If you make a mistake when entering a number, re-enter the number to correct it. 9. When done, go to the Subnet Mask fields. 10. Repeat the same entry process for Subnet Mask, Gateway, and DNS Server. 11.When done, select OK. The network test screen appears and the verification process starts. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online services, please contact your Internet service provider." message appears. Select OK. services, please contact your Internet service provider." message appears. Select OK. Network Status Menu > Network > Network Status You can check the current network and Internet status. If the wired network connection failed... . No network cable found. Check if your network cable is plugged in. If it is connected, make sure that the router is turned on. If it is on, try turning if off and on again. . IP auto setting failed. Try the following to set your IP address automatically or set y...
Questo manuale è adatto anche per i modelli :TV - UA32EH4030W (2.17 mb)
TV - UA32EH4500W (2.17 mb)
TV - UA32EH4530W (2.17 mb)
TV - UA32EH5300W (2.17 mb)