This message appears after joining an HP StoreEasy 3000 system to a domain, and then logging
on to the system again as the local administrator. This occurs when you deploy HP StoreEasy
3000 Storage in a cluster configuration or on a standalone server.
To resolve this issue, perform the following:
1.
Add a domain user as a member of the local Administrators group on the HP StoreEasy 3000
Storage system.
2.
Log off and log on again as the domain user.
The Initial Configuration Tasks window opens automatically.
3.
Complete the configuration tasks.
•
While deploying HP StoreEasy 3000 Storage as a two node cluster, after selecting a language
and accepting the EULA, you may see a message box with the error:
Found more than one node. Cannot establish communication with the second
node.
The message box has two buttons; Retry and Cancel. This may occur if you have ordered the HP
StoreEasy 3000 Storage systems with optional network adapters and have cabled ports on those
adapters to your network infrastructure.
As shown in the Quick Start Guide, there is one network cable that must run between the Port 4
adapters on each of the two nodes. Keep this network cable in place, as well as the network
cable to the iLO port, but disconnect all other network cables on the system where you received
the error message. Then click Retry. You may reconnect the cables later after the second node is
discovered.
•
The Create Volumes link in the Storage Configuration section launches the Virtual Disk wizard.
While creating a new virtual disk, if you select Create a volume when this wizard closes, the
Create Volume wizard is auto-launched after the virtual disk is created.
•
On a non-English HP StoreEasy 3000 Storage standalone system, the ICT may not display the
Set local administrator password link.
Change the password using one of the following methods:
◦
Connect to the server using iLO. From the iLO menu, select Keyboard→CTRL-ALT-DEL. The
option to change the password is displayed.
◦
Log in to the server. Navigate to Control Panel→User Accounts. Select Change account type
and then select Administrator. Select Change the password and enter the new password
credentials. Click Change password.
Network Configuration Tool
•
If you select Do not configure network interface VLAN identifiers now after assigning VLAN IDs
to Teams or adapters, the assigned IDs are not removed.
For all Teams and adapters, you must navigate through each VLAN page and select Do not add
a VLAN ID to this Team.
•
If you assign the same subnet mask to more than one network interface on the same server, it
might have unexpected results.
HP recommends that you must not configure more than one network interface with the same subnet
mask on a server.
•
You must select the interfaces in the Interface Selection wizard before the interfaces can be added
to a Team. However, NCT (Network Configuration Tool) does not display any message regarding
this.
HP recommends that you always select the interfaces on the Interface Selection page so that the
interfaces are available to the Team in the Team Creation page.
Workarounds
7

---

...

Questo manuale è adatto anche per i modelli :
dati dispositivi di elaborazione - HP StoreEasy 3830 Gateway Storage/S-Buy (183.78 kb)
dati dispositivi di elaborazione - HP StoreEasy 3840 Gateway Storage (183.78 kb)
dati dispositivi di elaborazione - HP StoreEasy 3840 Gateway Storage/S-Buy (183.78 kb)
dati dispositivi di elaborazione - HP X3400 G2 Network Storage Gateway (183.78 kb)