valutazioni - 3, GPA: 4.3
(
)
)
|
Foto e specifiche Samsung VP-DX105I |
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
This function works only if “Auto Power Off” is set to “6 Min.”.page 80 • Make sure that the battery pack fits firmly into place. Do not drop the battery pack as it may cause damage. About the battery life Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace it with a new one. Each battery’s life is affected by storage, operating and environmental conditions. English _17 preparation Charging the battery pack • Use IA-BP80W battery pack only. • The battery pack may be charged a little at the time of purchase. 1. Slide the POWER switch downwards to turn off the power. 2. Open the LCD screen and attach the battery pack to the DVD camcorder. .page 16 3. Open the DC IN/USB/AV jack cover. 4. Connect the AC power adaptor to the DC IN jack of your DVD camcorder. 5. Connect the AC power adaptor to a wall socket. • The ACCESS/CHG (charging) indicator lights up in orange and charging starts. The ACCESS/CHG (charging) indicator lights up in green when the battery is fully charged. 6. Once charged, disconnect the AC power adaptor from the DC IN jack on your DVD camcorder. • Even with the power switched off, the battery pack will still discharge if it is left attached to the DVD camcorder. It is recommended that you remove the battery pack from the DVD camcorder. Charging indicator The colour of the ACCESS/CHG (charging) indicator indicates the power or charging state. - If the battery has been fully charged, the charging indicator is green. - If you are charging the battery, the colour of the charging indicator is orange. - If an error occurs while the battery pack in charging, the charging indicator blinks orange. 18_ English POWER switch ........ Charging, recording and playback times with a fully charged battery pack (with no zoom operation, etc.) For your reference, the approximate time with fully charged battery pack: Battery Pack Charging time 1 hr 50 min Continuous recording time Playback time LCD Viewfinder 60min 65min - The time above is based on Fine mode. It may differ depending on Super Fine or Normal mode. - The time is only for reference. Figures shown above are measured under Samsung’s test environment, and may differ from your actual use. - The charging time will vary depending on the remaining battery level. Continuous recording time (without zoom) The times shown in the table reflect the available recording time when the DVD camcorder is in the recording mode without using any other functions. In actual recording, the battery pack may discharge 2-3 times faster than this reference since the record start/stop and zoom are being operated, and playback is performed. Assume that the recordable time with a fully charged battery pack is between 1/2 and 1/3 of the time in the table, so prepare enough battery packs to allow for the time you are planning to record on the DVD camcorder. Note that the battery pack discharges faster in a cold environment. English _19 preparation Using the DVD camcorder with the AC power adaptor It is recommended that you use the AC power adaptor to power the DVD camcorder from a household AC outlet when you perform settings on it, finalise a disc, play back, or edit images, or use it indoors. .page 18 . Be sure to use the provided AC power adaptor to power the DVD camcorder. Using other AC power adaptors could cause electric shock or result in fire. • The AC power adaptor can be used around the world. An AC plug adaptor is required in some foreign countries. If you need one, purchase it at your local Samsung dealer. • Before detaching the power source, make sure that the DVD camcorder’s power is turned off. Failure to do so can result in DVD camcorder malfunction. CAUTION • Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor from the wall outlet immediately if any malfunction occurs while using your DVD camcorder. • Do not use the AC power adaptor in a narrow space, such as between a wall and furniture. 20_ English BASIC DVD CAMCORDER OPERATION Turning the DVD camcorder on and off You can turn the camcorder on or off by sliding the POWER switch down. Selecting the operating modes • Set the operation mode by adjusting the Storage mode switch (VP-DX103( i )/DX104/ DX105( i ) only) and MODE button before recording or operating any functions. 1. Set the Storage mode switch to DISC or CARD. (VP-DX103(i)/DX104/DX105(i) only) - DVD camcorder mode: To record movie on a DVD disc. .page 33 - Digital camera mode: To record movie or photo images on memory card. .pages 56~57 2. Press the MODE button to set Record( button toggles between the Record( ) or Play( ) mode and Play( ) mode. Each press of the MODE ) mode. When the DVD camcorder is turned on, the self-diagnosis function operates and a message may appear. In this case, refer to warning indicators and messages (on pages 104~106) and take corrective action.
Videocamere - VP-DX100 (16 mb)
Videocamere - VP-DX100H (16 mb)
Videocamere - VP-DX100I (16 mb)
Videocamere - VP-DX103 (16 mb)