Log:
valutazioni - 2, GPA: 4 ( )

Istruzioni per l'uso Yamaha, Modello M7CL-32

Produttore : Yamaha
File Size : 11.76 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :

Facilità d'uso


Use the encoders of the SELECTED CHANNEL section to edit the EQ settings. This window lets you control the ATT and HPF settings of all eight channels shown. 1 2 3 4 5 1 Channel select button This indicates the channel number, the icon selected for that channel, and the channel name. Press these buttons to select the channel you want to copy or paste, or to select multiple channels. B EQ graph This mini-graph shows the approximate response of the EQ parameters. You can press the EQ graph to switch to the one-channel window with that channel selected. If the EQ or high-pass filter is on, the response curve is highlighted. C EQ ON/OFF button Switches the EQ on/off. D ATT knob This knob adjusts the attenuation / gain amount before the signal enters the EQ. You can press the ATT knob to select it, and then use multifunction encoders 1–8 to make adjustments. E HPF knob, HPF ON/OFF button (input channels only) These controls switch the high-pass filter on/off, and adjust its cutoff frequency. You can press the HPF knob to select it, and then use multifunction encoders 1–8 to make adjustments. M7CL Owner’s Manual Using EQ Using EQ This window displays all input channels (or output channels) at once. This page is only for display, and does not allow the parameters to be edited. It is useful when you need to quickly check the EQ settings for all channels, or when you want to copy/paste EQ settings between distant channels. 1 2 1 Channel select button This indicates the channel number, the icon selected for that channel, and the channel name. Press these buttons to select the channel you want to copy or paste, or to select multiple channels. B EQ graph This mini-graph shows the approximate response of the EQ parameters. You can press the EQ graph to switch to the one-channel window with that channel selected. If the EQ or high-pass filter is on, the response curve is highlighted. 3 Access the ATT/HPF/EQ popup window (1 ch), and press the EQ ON button to enable the EQ. If the ATT/HPF/EQ popup window is displayed, you will be able to edit all of the EQ parameters. 4 If you want to use the high-pass filter on an input channel, operate the HPF knob or HPF ON/OFF button in the ATT/HPF/EQ popup window. Input channels provide a high-pass filter that is independent of the four-band EQ. The HPF ON/OFF button switches the high-pass filter on/off, and the HPF knob adjusts the cutoff frequency. HINT • Output channels do not have a high-pass filter that is independent of the EQ. However, you can turn on the high-pass button in the popup window to use the LOW band EQ as a high-pass filter. •For both input channels and output channels, you can turn on the low-pass filter button to use the HIGH band EQ as a low- pass filter. 5 If you want to copy EQ settings to another channel, or initialize the EQ settings, use the tool buttons of the ATT/HPF/EQ popup window. For details on how to use these buttons, refer to “Using the tool buttons” (> p. 35). HINT • EQ settings can be saved/loaded at any time using the dedicated library (> p. 35). Presets suitable for a variety of instruments or situations are also provided. •You can also access the SELECTED CHANNEL VIEW screen, and use the encoders of the SELECTED CHANNEL section to edit the EQ and high-pass filter (> p. 91). •Even when the ATT/HPF/EQ popup window is displayed, you can use the encoders of the SELECTED CHANNEL section to control the EQ. 10 EQ and 117 M7CL Owner’s Manual Using dynamics Using dynamics Using dynamics Input channels provide two dynamics processors, and output channels provide one dynamics processor. 1 Use the navigation keys to access the OVERVIEW screen for the channel whose dynamics you want to control. The DYNAMICS 1/2 field shows the dynamics on/off status and the amount of gain reduction. DYNAMICS 1 field DYNAMICS 2 field 2 In the OVERVIEW screen, press the DYNAMICS 1/2 field to access the DYNAMICS 1 (2) popup window. In the DYNAMICS 1 (2) popup window, you can edit the dynamics settings and turn the processor on/off. There are three variations of this popup window; one- channel, eight-channel, and ALL. These windows include the following items. [DYNAMICS 1 (2) popup window (1ch)] This window shows only the currently selected channel. All dynamics parameters can be viewed and edited. This is convenient when you want to make detailed dynamics settings for a specific channel. 23 1 4 5 9 67 8 1 Dynamics type buttons Use these buttons to select one of the following four types of dynamics. • Input channels DYNAMICS 1 GATE DUCKING COMPRESSOR EXPANDER DYNAMICS 2 COMPRESSOR COMPANDER-H (Hard compander) COMPANDER-S (Soft compander) DE-ESSER • Output channels DYNAMICS 1 COMPRESSOR EXPANDER COMPANDER-H (Hard compander) COMPANDER-S (Soft compander) •For details on the dynamics parameters, refer to the supplementary material at the end of this manual. (> p. 249) HINT B Dynamics graph This graph displays the approximate response of the dynamics processor. C Level meter These me...

Questo manuale è adatto anche per i modelli :
Strumenti Musicali - M7CL-48 (11.76 mb)
Strumenti Musicali - M7CL-48ES (11.76 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie