valutazioni - 4, GPA: 3.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Changes in V1.06 • Speed of synchronization with M7CL Editor has been improved. • In the ATT/HPF/EQ popup window (1ch) and the DYNAMICS popup window (1ch), the location of the ON button has been distanced from the “ . ” (close) button in order to prevent accidental operation. • By pressing a GEQ fader in the GEQ popup window, you can now switch the faders assigned to the Centralogic section. The numbers of the assigned faders are shown on the GEQ faders. • The position of the window has been improved so that the channel number and channel name field at the bottom of the display can be seen even when a popup window or the SCENE LIST window is displayed. Changes in V1.10 • When you use the SAVE/LOAD screen to save all of the M7CL’s internal data (except for user authentication key data) in a single operation, the user level, user-defined keys, and preference settings of the administrator and guest will also be saved. On the M7CL console, this data can be loaded only when the administrator logs in. In M7CL Editor (V2.1.1 or later), this data can be read at any time. However on earlier versions of the M7CL console or M7CL Editor, this data that was saved in V1.10 or later cannot be read. •You can now view the M7CL’s Help by pressing the (Help) button in the function access area. For details, refer to “Using the Help function.” • The assigned user-defined key will now blink while you’re viewing a screen or popup window that’s book- marked by a user-defined key. •You can now reset the GAIN to the default value (0.0 dB) for each band by simultaneously pressing the SELECTED CHANNEL section EQ [Q] encoder and EQ [GAIN] encoder. • The following have been added as parameters that can be assigned to the user-defined keys. FUNCTION PARAMETER 1 PARAMETER 2 Description SET BY SEL SET [INSERT ON] — By holding down this key and pressing the [SEL] key of a channel, that channel’s INSERT ON can be switched on/off. SET BY SEL SET [DIRECT OUT ON] — By holding down this key and pressing the [SEL] key of a channel, that channel’s DIRECT OUT ON can be switched on/off. HELP — — Opens or closes the HELP popup window. If you hold down this key and operate a panel controller (except for the faders) or an on- screen controller, the corresponding explanation will appear. • PRE FADER (immediately before the fader) has been added as a position for direct output from an INPUT channel. • If you’re using the M7CL V1.10, you must use V2.1.1 or later of M7CL Editor. You can download the most recent version of M7CL Editor from the following website. EN Using the Help function Using the Help function *We accept no responsibility for any damages that may occur as a result of using help files created by a third party other than Yamaha. ¦ Loading a Help file from a USB storage device NOTE • The help file is not backed up in internal user memory. Each time you turn on the power, you must reload it from your USB storage device. It is convenient to save your h...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - M7CL-48 (1.15 mb)
Strumenti Musicali - M7CL-48ES (1.15 mb)