valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
HP StorageWorks EML E-Series
CAUTION:
Interface Manager memory
Parts can be damaged by electrostatic discharge. Keep parts
in their containers until needed. Make sure you are properly
grounded when touching static sensitive components.
module upgrade
CAUTION:
This part is not hot-pluggable. It is necessary to power off the
library to replace this part.
Use the 256 MB memory module only on the 340252-
1 Opening the library doors
001 and 340252-002 Interface Manager cards. These
versions of the Interface Manager card contain a label
with the part number “AS#340252-001” or
“AS#340252-002” and have an AUX port next to the
serial port. Use the 1 GB memory module only on the
340252-003 Interface Manager card. This version of
the Interface Manager card contains a label with the
part number “AS#340252-003”, has a USB port next
to the serial port, and has the word “DUAL” printed
on the bezel.
© Copyright 2007–2009 Hewlett-Packard Development Company,
L.P.
Second edition: September 2009
The information in this document is subject to change without notice.
Printed in the US
Open the back doors of the library.
www.hp.com
2 Powering off the library
Use your backup software or the front panel to empty the picker or to
verify that the picker is empty.
Stop all library activity and ensure that the picker is empty.
Set the library power switch at the upper right corner to the OFF position.
Ensure that all power indicators on the power supplies are off.
*AG104-96005*
Page 1
... Questo manuale è adatto anche per i modelli :
dati dispositivi di elaborazione - HP EML 103e Tape Library (294.14 kb)
dati dispositivi di elaborazione - HP EML 245e Tape Library (294.14 kb)
dati dispositivi di elaborazione - HP EML Base Library (294.14 kb)
dati dispositivi di elaborazione - HP EML E-Series 103e Base Tape Library (294.14 kb)