Before beginning assembly, read the instructions and identify parts using the hardware identifier and parts list in this document. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly. • Display must have a minimum of 369 lbs. (163.3 kg) of added ballast located as shown in instructions to keep pole assembly u

Be sure to follow directions carefully. Insert one "arm” of clip (19) into ram (18) as shown. Twist "body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows. Push second "arm” back and into ram as shown. Twist “body” of clip slightly again to spread “arms” of clip. Clip “arms” must be flat and touching edge to edge as shown, not overlapping. 1 08/02 P/N 211971 Install net. Insert net into bottom of clip as shown

To ensure safety, do not attempt to assemble this system without following the instructions carefully. Check entire box and inside all packing material for parts. Before beginning assembly, read the instructions and identify parts using the hardware identifier and parts list in this document. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed,

READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. WARNING! Tools Supplied: 1 Allen Wrench 1 Phillips Screwdriver 1 Wrench 7/16 1 Wrench5/16 Tools Needed: 4 "D" Cell Batteries Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339, For Europe: 00 800 555 85234 (Sweden: 009 555 85234), For Australia: 1-800-333 061 Internet Address: 1 11/03 P/N 211483E © COPYRIGHT 2000 b

Check entire box and inside all packing material for parts. Before beginning assembly, read the instructions and identify parts in this document. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly. During assembly, if using a ladder use extreme caution. Two people are recommended for this operation. If tech

TOOLS SUPPLIED: TOOLS NEEDED: • 1 Allen Wrench • Wrench (4 mm & 6 mm) • 2 People TOOLS SUPPLIED: TOOLS NEEDED: • 1 Allen Wrench • Wrench (4 mm & 6 mm) • 2 People SHARP OBJECT INFLATION NEEDLE KEEP OUT OF REACH OF SMALL CHILDREN. NOT FOR CHILDREN UNDER 3 YEARS. CHOKING HAZARD SMALL PARTS: INFLATION NEEDLE AND SMALL HARDWARE. NOT FOR CHILDREN UNDER 3 YEARS. KEEP BAGS AWAY FROM BABIES AND CHILDREN. DO NOT USE IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THE THIN FILM MAY CLING TO NOSE AND MOUTH AND PREVE

NOT SUITABLE FOR CHILDREN UNDER THREE YEARS OF AGE DUE TO SMALL PARTS/CHOKING HAZARD. WARNING Read and understand operator's manual before using this unit. Failure to follow operating instructions could result in injury or damage to property. REQUIRED TOOLS AND MATERIALS: • Phillips Head Screwdriver Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339, For Europe: 00 800 555 85234 (Sweden: 009 555 85234), For Australia: 1-800-333 061 Internet Address: 1 07/03 P/N

Label is shown on page 1 If technical assistance is required, contact Huffy Sports. Adult supervision is recommended when adjusting Most injuries are caused by misuse and/or not following Use caution when using this system. For more information on assembly, placement, maintenance, visit The American Basketball The NBA and individual NBA copyrighted designs, and/or Properties, Inc. and the respective written consent of NBA Toll-Free 1-800-558-For Canada: 1-800-284-For Europe: 00 800 555 (Sweden:

(2.4m) • Adjustable Wrench • Wrenches: (One) 3/4” (Two) 1/2” • Phillips Screwdriver WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit. · See instruction manual for proper installation and maintenance. · Use caution when performing dunk type activities on this unit. · Do not hang from any part of unit, including backboard, support braces, rim or net. · Check un

Attach a side panel (22) to the end panel (23) by using leg bolt (4) and leg washer (5). B. Slide the plastic rod washer (21) and rod bushing (20) onto each end of the player rods. C. Follow the diagram and insert the player rods (14, 15, 16, 17, 18, & 19) through the designated holes in the side panel (22). IMPORTANT: Make sure the small hole in the end of the rods (17, 18, and 19) are through the side panel 0 0 0 6 0 0 0 0 „ °°U X v* % D. Slide the other ends of the player rods t