Log:

LST 0130

Scaricare : 21 File Size : 580 kb    Produttore : LST  
Categoria : allarme antincendio

Neither juridical responsibility nor any kind of liability is taken for eventually remaining incorrect information. Labor Strauss Sicherungsanlagenbau Ges.m.b.H. reserves the right to change information without notice and thereby does not take any liability. The pointing out of possible errors in the manual will be gratefully accepted by the authors. All brand names and product names used in this manual are trade names, sevice marks, trademarks, or registered trademarks of their respective owner

LST AN9161202

Scaricare : 2 File Size : 580 kb    Produttore : LST  
Categoria : allarme antincendio

11. Has no element text been programmed, the second line of the zone text (if available) is displayed. In this case, the '.'-button has a special function: The detector zone whose technical message is currently displayed is disabled by using this button. 4.7.4 Displaying fault messages - menu point [Faults] Scroll through all current faults by using the '^v'-buttons (details see from page 58 in Chapter 5.5: "Fault-message condition"). 1.ACTU.FLT 0003/018 2.ENERGY FAULT stand-by

LST BC016-1

Scaricare : 6 File Size : 215 kb    Produttore : LST  
Categoria : allarme antincendio

Therefore, immediate response to a fire is imperative. The main objective of the fire detection control panel Series BC016 is to alarm and to react in time and, consequently, save lives and protect property. For decades LST have focused their aims to undertaking unrivaled efforts in order to realize new innovations in the security area. Research, development and production are loca- Already in the basic version the fire detection control panel BC016-1 is equipped with eight detector lines in con

LST BC016-2

Scaricare : 6 File Size : 214 kb    Produttore : LST  
Categoria : allarme antincendio

Individual detector identification can be achieved by means of an optional address module. • A slot for connecting the Detector Zone Extension MGE8-1 is available for the extension to 16 conventional detector lines. • Dry relay outputs indicate the alarm and fault conditions on the control panel. In addition, 16 open-collector outputs, two auxiliary inputs, and an additional relay output are available for general applications. • Up to 8 alarming devices can be operated as evacuation circuits dir

LST 2251CTLE

Scaricare : 2 File Size : 201 kb    Produttore : LST  
Categoria : allarme antincendio

That way on the one hand the detector shows an especially high insensitiveness to unwanted alarms, on the other hand fires are recognised quickly and safely. The multi-criteria detector can operate in difficult fields of application, for instance • workshops – e.g., welding shops, paint shops • hotel rooms with steam formation in the bathroom • smoking areas in bars or restaurants • discotheques with fog generators • garages or loading ramps and is therefore suitable for virtually universal use.

LST BCnet216: 19"

Scaricare : 8 File Size : 181 kb    Produttore : LST  
Categoria : allarme antincendio

Therefore, immediate response to a fire is imperative. The main objective of the fire detection control panel Series BC216 is to alarm and to react in time and, consequently, save lives and protect property. For decades LST have focused their aims to undertaking unrivaled efforts in order to realize new innovations in the security area. Research, development and production are loca- The Fire Detection Control Panel BC216-1CE is a modularly designed compact control panel in 19“ slide-in technolog

LST 55000-878

Scaricare : 0 File Size : 149 kb    Produttore : LST  
Categoria : allarme antincendio

They are powered and actuated as modules via the ADM loop with Apollo/Discovery protocol, and they are designed for indoor use. Due to the use of LEDs a very long lifetime distinguishes the strobes. Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX. +43 1 52114-27 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED 55000-87x DBL LST EN 0804.PDF • PAGE 1 Protective Housing 29600-318 The Protective Housing 2

LST 55000-877

Scaricare : 3 File Size : 149 kb    Produttore : LST  
Categoria : allarme antincendio

150|jA (quiescent), 3mA (active) Ambient temperature -10°C to +60°C Protection class IP42 Dimensions 0 x H 100 x 52 (mm) Weight 85g Red cap Order number 356020 Order name Strobe/FB/XP95/White/Red 55000-877 Colourless cap, red LEDs Order number 356022 Order name Strobe/FB/XP95/White/Clear 55000-878 Orange cap Order number 356023 Order name Strobe/FB/XP95/White/Orange 55000-879 are fitted into a Standard or Isolator Detector Base Series XP95. They are powered and actuated as mod

LST 55000-879

Scaricare : 0 File Size : 149 kb    Produttore : LST  
Categoria : allarme antincendio

The housing protects a Strobe 55000-877, 55000-878 or 55000-879 from dust or humidity. Specifications Ambient temperature -40°C to +80°C Protection class IP67 Dimensions W x H x D 125 x 125 x 100 (mm) Weight 292g Order number 359023 Order name Housing IP67 for Strobe/FB/XP95 29600-318 Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX. +43 1 52114-27 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED

LST BC216-1S

Scaricare : 44 File Size : 129 kb    Produttore : LST  
Categoria : allarme antincendio

Therefore, immediate response to a fire is imperative. The main objective of fire detection control panel Series BC216 is to alarm and to react in time and, consequently, save lives and protect property. For decades LST have focused their aims to undertaking unrivaled efforts in order to realize new innovations in the security area. Research, development and production are loca- The fire detection control panel BC216–1S is designed to be used in small systems with only one ADM loop. It comprises





categorie