By default, this feature is enabled. Note: If this feature is disabled, saved messages are deleted automatically without warning when they expire. Setting Message Recording Options Set voice mail message recording parameters: Parameter Description Minimum Recording Length Sets the minimum length in seconds for any recording (incoming voice mail message, personal greeting, system prompts, introductions to forwarded voice mails). This can be from 1–5 seconds, or 0, which means no minimum. All reco

(Depending on the DSL provider’s recommendations, you may or may not want to use DHCP.) 4. Configure the Alti-IP 600H phone’s AltiWare address. 5. If NAT server is used, access NETWORK settings in the configuration menu. Change ENABLE NAT setting to YES and assign the NAT server’s public IP address in the NAT Address setting. 6. If configuring with an H.323 NAT router, the NAT router can forward IP traffic to a specified private IP address based on the destination port in the TCP/IP or UDP packe

All materials being returned to AltiGen must have an associated RMA number. RMA numbers are issued by AltiGen Customer Service and can be obtained by calling 1-888-ALTIGEN (258-4436) or submit an online RMA request via the AltiGen Partner Resource Center, at AltiGen reserves the right to refuse return of any material that does not have an RMA number. The RMA number should be clearly marked on the outside of the box in which the material is being returned. For example: Attn.: RMA # 123 AltiGen Co

Note: The lower left Soft Key is set up as FLASH by default. This can be re-assigned in AltiAdmin (AltiGen IP Phone Configuration). The phone setting key, once set up by the system administrator, can be configured as a feature code or speed dial key directly from the user’s IP Phone using * *6ENTER. Alti-IP 600 Manual 2 6 Volume Increases/decreases volume of ringer, speaker and handset/headset. 7 Navigation keys !/"(UP/DOWN keys) allow you to scroll through text and select features displayed on

(The virtual extension that Call Router uses does not have to be a member of the workgroup.) Specify this workgroup extension in the textbox that appears when you select Play WG Queue Status. (See “Queue Announcements” on page 13.) If you want to apply the “Play WG Queue Status” Target action to several different workgroups, you must create separate rules for each. 6. Enter optional data to match against the routing rule: • Set Call Priority—Check the box and choose a call priority level. • Set

Currently, we do not know of any telecommunications system that is immune to this type of criminal activity. AltiGen Communications, Inc., will not accept liability for any damages, including long distance charges, which result from unauthorized and/or unlawful use. Although AltiGen Communications, Inc., has designed security features into its products, it is your sole responsibility to use the security features and to establish security practices within your company, including training, securit

28 ListeningtoMessages ................................28 SendingMessages ...................................30 MakingaCallfromwithintheAltiGenVoiceMailSystem... 30 PersonalOptions ......................................31 RecordingGreetings.................................. 31 ChangingyourPassword..............................32 UsingMessageNotification............................ 33 UsingReminderCalls ................................34 AltiTouch 500 Manual ii CallForwarding ....................

This is a criminal offense. Currently, we do not know of any telecommunications system that is immune to this type of criminal activity. AltiGen Communications, Inc. will not accept liability for any damages, including long distance charges, which result from unauthorized and/or unlawful use. Although AltiGen Communications, Inc. has designed security features into its products, it is your sole responsibility to use the security features and to establish security practices within your company, i

D or higher) • AltiGen’s Triton T1 Board (one or more) • AltiWare OE R3.0 (or higher) • 300W/10A CPU Power (minimum required to power AltiGen boards only) • CSU (Channel Service Unit) # of AltiGen Boards # of Slots** CPU HDD 1 Triton T1, 1-3 Quantum 2 PCI, 3 ISA 233 Mhz 2GB 1 Triton T1, 1-6 Quantum 2 PCI, 6 ISA 300 Mhz 2GB 1-4 Triton T1, 1-10 Quantum 5 PCI, 10 ISA 350 Mhz 4GB # of AltiGen Boards Power Supply** Typical Power Supply 1 Triton T1, 1-3 Quantum +12V: 4.2 Amps +5V: 6Amps 300W/30A@5V/12