2 General Safety Instructions P.3 List of Main Parts P.4 Tech. Specifications, Contents of Packaging P.5 Operation and Use P.5-7 Maintenance P.8-9 Trouble Shooting P.10 Service Center Information P.10 Warranty Information P.12 Warranty Card P.13 1 IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION Thank you for purchasing our CRANE Ultrasonic Humidifier. Each unit has been manufactured to ensure safety and reliability. Before using the humidifier for the first time, please read the instructions carefull

. Too much humidity in the room may allow moisture to accumulate on surfaces where bacteria and fungi can grow. Moisture that gathers may also damage furniture and walls, especially wallpaper. . To eliminate excessive humidity, especially in small rooms, leave the room door open and adjust the mist intensity control setting. 7 MAINTENANCE CAUTION: Always be sure that the appliance is unplugged and switched OFF before cleaning or attempting to store the item. NEVER PLUG OR UNPLUG UNIT WITH WET HA

4 List of Main Parts P.5 Tech. Specifications, Contents of Packaging, Know Your Air Purifier P.6 Features P.7 Operation and Use, Replacing HEPA Filter P.8 Replacing UV Light, Maintenance P.9 Troubleshooting, Service Center P.10 Limited Warranty P.ll Warranty Card P.13 Order Form P. 14 AIR PURIFIER MODELS This instruction manual applies to the following Crane Air Purifier product range: PENGUIN Model# EE-5065 SHARK Model# EE-5064 For information on all CRANE Air Purifiers please

For proper air flow, locate the unit at least 3 feet from any wall or furniture. 2. Do not place unit in close proximity to electronic devices that are sensitive to electrical fields. 3. Do not place unit on metal shelving. Air purifier may be placed on floor, nightstand, table or desk. Make sure that the outlet grille faces away from the nearest wall or furniture. 4. Make sure that the intake and outlet grilles are not blocked. 5. Plug into a grounded 120V outlet. See manual SAFETY INSTRUCT

DO NOT plug in the cord with wet hands; electric shock could happen 1. Be sure the humidifier is switched to OFF and the unit is disconnected from electrical outlet. 2. Select a location for your humidifier. On a flat surface, about 4 inches away from a wall. 3. DO NOT place the humidifier on a finished floor or near furniture, which can be damaged by moisture or water. Place on a water resistant surface. 4. DO NOT place Humidifier on top of a towel, or a carpeted surface. The air vent on the bo

2-3 General Safety Rules P.4 List of Main Parts, Technical Specifications, Contents of Packaging P.5 Operation 00 - P. Maintenance P. 8 Service Center P. 9 Warranty Information P.lO Warranty Card P. 12 1 INSTRUCTIONS Always follow basic safety precautions when using electrical products, especially when children are present. WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING I

Business hours Mon-Fri 9:00am-4:00 pm CT. 4 HOW TO ASSEMBLE NOTE: Refer to LIST OF MAIN PARTS on page 4. 1. Lay the main body of the fan gently on the floor, take the base (3) and place power cord (6) in the cord groove. 2. Attach the fan body and the base by tightening the base screws (4) with a screwdriver. 3. Secure power cord (6) to base (3) with clamp screws (5). HOW TO USE How to Locate the Remote Controller IMPORTANT: Remove the clear plastic sticker that is visible at the bottom

HOW TO ASSEMBLE NOTE: Refer to LIST OF MAIN PARTS on page 4. 1. Lay the main body of the fan gently on floor, take the base (3) and place power cord (6) in the cord groove. 2. Attach the fan body and the base by tightening the base screws (4) with a screwdriver. 3. Secure power cord (6) to base (3) with clamp screws (5). HOW TO OPERATE How to Locate the Remote Controller The remote controller can be removed from remote controller holder, at the back of the tower fan near the top (see drawing bel