2) Important: Please fully read the installation instructions prior to installation. Installation should only be carried out by suitably qualified electrician and/or authorised installer. These instructions should be retained for future reference. 3) Standards of Installation: The installation must be carried out in accordance with the applicable local safety and installation standards. The installation must be in accordance with the manufacturer’s installation instructions; a person qualified i

Product code plate affixed to the individual unit reflects the specifications of the individual unit. Page 8 Premier Heat Pumps – Water Heater and Chiller Manual 3 - Installation 3-1 Locating the Unit It is important to install the hot water heat pump in accordance with the following instructions. Water and electrical connections must be carried out by a suitably qualified tradesman or installer • The appliance must be installed outside. • The appliance must be mounted on its anti-vibratory stud

3) Press the timer-on button again, and the set up is cancelled. 4) If the on/off button is pressed while the unit is under the timer on setting, the unit will start immediately. The timer setting is at that point cancelled. Timer-Off Switch 1) When the heater is on, press the timer-on button to set time for the timer-on switch. Press the button once to change the time interval of 1 hour in a cyclic manner of 1,2,...24,1,2 (The display shows the previous time as the starting time of the present

greener. introduction Premier Building System’s SIPs Installation Guide has been divided into convenient sections covering most aspects of PBS SIPs installation. Designed for carpenters, framers, contractors and do-it-yourselfers, the instructions and detailed illustrations will give you the basics of building with PBS SIPs at just a glance. Premier’s SIPs installation techniques are based on Premier Building Systems’ continuing program of independent, third-party testing and more than 30 years