. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 – SC-602 Subwoofer Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 – SC-600 IW, SC-600 IF/IC Subwoofers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Setup Checklist . . . . . . . . . . . . . . . . . . . . . .

If you use this method of connection, make sure to select the “large” speaker option in the receiver’s set-up menu. Also, select the option for no subwoofer. This will make sure all bass and LFE information is fed the speaker outputs and be received by your SC-600D amplifier. Note: Using both speaker terminals and the line level inputs is not recommended, as this may damage the SC-600D amplifier or your receiver. (16) Speaker Level Output Terminals These connections send a crossed-over speaker-l

Press the night button to turn the night mode feature on or off. Activation of night mode causes “n” to appear briefly on the display. When night mode is deactivated, the display shows “n off” and then returns to normal function. .. SC-600D Amplifier User’s Manual 11 • VOLUME CONTROL — This control allows you to balance the output from the subwoofer to the main speakers in your system. This control should be set to achieve similar volume level of both the main speakers and subwoofer. When pressi

feet & grille) 3.6" x 17" x 13" (9 x 43.3 x 33 cm) **Allow two extra inches in depth for wire connectors and power cable. **Includes feet. Feet can be removed for rack mount use. Unit is approximately “two rack units” high. Warranty: (North America) Three years (electronics -parts and labor) Shipping Weight: (approx.) 17 lbs. (7.7 Kg) The following subwoofers are designed to work with the SC-600D amplifier: Specifications SC-600 IW (In-Wall) SC-600 IF/IC (In-Floor/In-Ceiling) Woofer: Two 6.5" ac

In the past, with a single microphone, the user needed to either optimize the bass for a single position, or move the mic manually among various spots and optimize the EQ curve accordingly. With the MIC-5, from one to five microphones can be used in different listening positions with the EQ software seeing an average of all the locations together as a single response curve. The MIC-5 works with all Digital Drive (DD) subwoofers including the DD-10, DD-12, DD-15, DD-18 and the DD-1812. It also ca