Produttore : HP
File Size : 1.19 mb
File Nome :
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• Configuration > Library Configuration > Configure
Load Ports
This command shows the number of installed load
Identify the parts of the library
ports and enables you to toggle between using each
for import/export or for storage. Configure it as a
load port to move tapes in and out of the library.
1
Configure it as slots to increase the number of
storage slots in the library. Changing a load port
6
configuration will cause a library reboot.
7
• Configuration > Library Configuration > Change
9
Network Settings
2
7
This configures the network settings for the Interface
Manager card, which can be set automatically using
DHCP (the default) or manually using a static IP
8
10
address. Use the Address Config: button to toggle
between these two options. If you are setting the
7
network addresses manually, set each address
element separately.
3
11
7
• Configuration > Library Configuration > Configure
7
Barcode Reporting Formats
This command defines how bar codes are displayed
on the OCP and sent to the host. Bar code reporting
4
7
10
can be configured as six to eight characters and left
or right aligned. If you choose six characters with left
7
alignment, any characters after the six are truncated.
If you choose six characters and right alignment, only
3
7
11
the last six characters are shown with the beginning
characters truncated.
7
• Configuration > Library Configuration > Configure
Reserve Slots
7
Up to nine slots can be reserved for special purposes,
5
7
11
such as cleaning tapes. The default is none. Select
the number you want to reserve and press Save.
7
• Configuration > Library Configuration > Configure
Front view
Inventory Mode
This command allows you to require bar codes on
1. Customer reserved space. If your library contains
tape cartridges, or to make them optional. Requiring
LTO4 tape drives, this space contains the switch
bar codes significantly shortens inventory time.
for the internal network.
2. Base module
3. Tape drive expansion module
4. Card cage expansion module
5. Capacity expansion module
6. Robotics unit
7. Viewing windows
8. Operator control panel (OCP)
9. 5-Cartridge load port
10.4U blank covers
11.10-Cartridge load ports
... Questo manuale è adatto anche per i modelli :
dati dispositivi di elaborazione - HP EML 103e Tape Library (1.19 mb)
dati dispositivi di elaborazione - HP EML 245e Tape Library (1.19 mb)
dati dispositivi di elaborazione - HP EML Base Library (1.19 mb)
dati dispositivi di elaborazione - HP EML E-Series 103e Base Tape Library (1.19 mb)