NOT INTENDED FOR USE WITH KITTENS UNDER SIX MONTHS. . Not intended for use by handicapped, incapacitated or older cats that might experience difficulty in entering or leaving the litter box. . PREGNANT WOMEN and IMMUNE-DEFICIENT PEOPLE should avoid contact with cat waste at all times. . CAUTION: THIS IS NOT A TOY. The LitterMaid® Self-Cleaning litter box is a precision-operated appliance. Should the rake become jammed during cleaning, THIS UNIT CONTAINS A MECHANISM THAT WILL AUTOMATICALLY STOP,

• Press in on four corners of lid to secure lid to the waste receptacle, pull up from both sides making sure to hold lid and receptable together; lift out and dispose (W). Disposable waste receptacles are available in packages of 12 or 18 and may be purchased through your local retailer, by visiting us at our website at or by calling us at 1-800-738-0245. We will be happy to assist you in any way we can. Rake Removal & Cleaning Removing the rake: The rake can be removed for easy cleaning. We rec

(Sensors need to be blocked for at least 5 seconds.) Important: Unit will not start a cleaning cycle while cat is in the box. • As soon as the cat leaves the litter box, the sensor activates the 10-minute countdown and the ionic air cleaner. • The ionic air cleaner stays on during the countdown and the cleaning cycle. • After the 10-minute countdown, the cleaning cycle starts and the rake scoops out the waste clumps. • If the cat reenters and leaves the litter box before the initial 10 minutes h

LED operation, function and why they blink: Green on control panel Power LED indicator is lit when power to the unit is on. Blinking green on control panel LED blinks (2 times per second) indicating batteries are low. LED blinks (1 time per second) when the rake assembly has encountered a blockage. Green on ionizer Ionic air cleaner LED (behind the rake) is only lit when the ionizer is operating. Red on control panel Sleep timer LED is continually lit when sleep mode is activated. Blinking red o

Included in AST is a shock protection device built into the line cord and equipped with a test button to check operation: Before Use: 1. Press RESET button on line cord safety device (A). 2. Plug into a regular AC electrical outlet. 3. Press TEST button and RESET button will pop out (see A) to show safety device is operating properly. Repeat this procedure each time you use heater to confirm safety device is operational. Should RESET button not pop out, do not use heater. Call appropriate "800"

This product is designed to make caring for your cat a simpler, less time-consuming process. OPERATING INSTRUCTIONS FOR THE LITTERMAID® SELF-CLEANING LITTER BOX • Cat enters the unit; once he/she leaves, the sensors are triggered, setting the timer for the cleaning cycle (sensors need to be blocked for at least 5 seconds). Important: Unit will not start a cleaning cycle while cat is in the box. • As soon as the cat leaves the litter box, the sensors activate the 10-minute countdown and the ionic

Read all instructions. . Do not touch hot surfaces. Use handles or knobs. . To protect against electrical shock, do not immerse cord, plug or base unit in water or other liquid. . Close supervision is necessary when any appliance is used by or near children. . Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. . Do not operate appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Ret

If the product should become defective within the warranty period we will repair it or replace if necessary, free of charge. In order for this warranty to be valid you must present the product along with a receipt as proof of purchase and/or the corresponding registration card. This warranty gives you specific legal rights and you may have other legal rights that could vary in your country. Should you have any question, contact your nearest Black & Decker store or service center. Note: You can a

6. A Dust Bag “Full” Indicator will appear in color in the window of the canister lid when the Dust Bag is full (see “Parts” Illustration). When this happens, the vacuum will lose some suction power and the Dust Bag should be emptied. See “Cleaning & Storage.” 7. When finished vacuuming, press the On/Off Foot Pedal to turn the Vacuum Off and unplug. Press the Retractable Cord Pedal with your foot and the cord will wind into the unit. CAUTION: The cord moves fast when retracting. Stand clear of t