1. Press ‘Menu’ 2. Press ‘Up’ or ‘Down’ until ‘3. Settings’ is selected, then press ‘Select’. 15 3. Press ‘Up’ or ‘Down’ until ‘4. System Configuration’ is selected, then press ‘Select’. 4. Press ‘Select’ on ‘1: Network Setting’, and use ‘Up’ or ‘Down’ to change network setting to ‘DHCP’, then press ‘Save’. 5. Please refer to Section 2.5 for SIP server setup information. 6. If you only need to change the network settings, but don’t need to change the SIP server information (i.e. this is not an i

The NEW icon will be displayed in the idle screen until all new calls have been viewed in the CID list. Note: To go directly to the first record of the CID list,press the UP or DOWN or or buttons in standby mode. *If you wish to call directly from the CID list, press the SPEAKERPHONE button or lift up the handset to dial the number automatically. Binatone Help Line : 0845 345 9677 17 To delete a Caller ID record Repeat the steps above to review the CID list, and to locatethe record you want to d

The default system PIN code is 0000. 1. Press

Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Do not use this telephone near a bathtub, kitchen sink, wash bowl, laundry tub, in a wet basement, near a swimming pool, or anywhere else where there is water. 4. Avoid using a telephone(other than a cordless type) during an electrical storm.There may be a remote risk of electric shock from lighting. 5. Do not use the telephone to report a gas leak in the vicinity of the leak. 6. Use only th

Note: If time has been set before, the current time will display, otherwise, 1. Follow Steps 1 to 4 in Section 7.2.1. 2. Press and to select TONE SETUP. This feature is available if you have subscribed to the Calling Line Identification 2. Enter the alarm time in 24 hour format. 3. Press and to select KEY TONE / BATTERY TONE / 1. Press to access the phonebook. 2. Press

Your phone can store up to 20 received calls with date/time information in the call list. The number will be shown on the display when the phone is ringing. If the number matches with one of the entries in your private phonebook, the caller’s name stored in the private phonebook will be displayed with the number. When new missed calls have been received the handset will display "XX New Call(s)". This will remain until at least one missed call has been viewed by that handset, and each handset wi

22 Binatone Help Line: 0845 345 9677 (Local Call rate) Color profile: Generic CMYK printer profile Composite Default screen Using a multi-handset system Press the INTERCOM button on the handset. Intercom 1 call from the .. The display show CALL INT briefly, then handset the numbers of any other handsets registered to the base. Press the appropriate number to select and call that handset 2 The other handset rings, and its display shows INT # (where # is the number of the number of the calling han

When entering the number, if you make a mistake, press to delete digits. 4.1.2 Direct Dialling Press to connect to the line and then enter the phone number. (Note: if you enter a wrong digit you cannot correct it with the key.) 4.1.3 Call from the phonebook Press

The signal between the handset and the base is in accordance with the normal standards for a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors. Be aware that: > Any large metal object, such as a refrigerator, mirror or filing cabinet, between the handset and the base unit may block the radio signal. > Other solid structures, like walls, may reduce the signal strength. > Other electrical equipment may cause interference and/or affect the range. 3) Do not place close to anot

In Idle mode / predialling mode / Redial list / Call List / Phonebook entry: Press to make a call with speakerphone During ringing: Press to answer a call with speakerphone FLASH (Recall) In idle / predialling mode: Press to insert a recall signal (also called Flash) During a call: Press to send a recall signal (also called Flash) MICROPHONE EARPIECE 9 3.2 Display Icons and Symbols The LCD display gives you information on the current status of the telephone. Steady when the handset is in range o