You can: > Record directly to a DVD from any video source, such as a VCR*, television tuner*, or digital camcorder. > Use wizards to successfully guide you through recording, editing, assisting with choices and preventing frustrating errors. > Re-edit from a previously-recorded DVD with MyDVD software. > Make CD-R and CD-RW recordings. * Requires an ALL-IN-WONDER® Radeon™ card. Note: Purchased or rented DVD movies are encrypted to prevent illegal copying. Take a moment to familiarize yourself wi

Printers, Network Connectivity, and other accessories should be connected only after computer setup and registration are complete. © a 221490-371 nitor 3 and Speakers d Voltage and Registration © ©2000 Compaq Computer Corporation. COMPAQ, the Compaq logo, and Presario Registered U.S. Patent and Trademark Office. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. First Edition November 2000. s 7 line! 221490-371

The hard disk consists of flat, round platters. Each side of each platter has a head that floats on a thin cushion of air over the surface of the rapidly spinning disk and picks up (reads) magnetically stored data or records (writes) data onto the disk. hard drive The drive that reads and writes to the hard disk. If you have a large hard drive, it may be divided into several partitions. Each partition is designated by a different icon and a drive letter, beginning, with the letter C. Partition C

art number 1-6 return (tower), part number 1-6 signal cable, part number 1-6 Index-2 Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide Index tower-to-rack conversion, part number 1-6 socket locations, illustrated 2-29 speed 5-4 miscellaneous plastics kit, part number 1-3 miscellaneous, part numbers 1-6 labels See symbols on equipment LEDs N CPU fan status 4-12 DIMM status 4-12 NIC (Network Interface Controller) external health 4-9 activity LED 4-16 hard drive, activity 4-14

Install the four guide screws (two on each side) that you removed from the old drive into the new drive. The screws help guide the drive into its proper position in the bay. 2. Slide the drive into the drive bay 1, making sure to align the guide screws with the guide slots, until it snaps into place. Sliding the Drive into the Drive Cage 3. Reconnect the power and data cables to your drive as indicated in the following illustrations. Hardware Reference Guide 3–9 Computer Upgrades Reconnecting th

Four removable media bays contain one third-height diskette drive and one half-height IDE CD-ROM drive. Two bays can contain a second CD-ROM drive, tape drives, hard drives, or any SCSI device. Compaq ProLiant ML370 Servers support up to ten mass storage devices including the diskette drive and IDE CD-ROM drive. Figure 2-7 and Table 2-1 describe the drive configurations. 3 5 4 3 2 1 0 2 1 6 5 4 9 8 7 Figure 2-7. Drives and related components Table 2-1 Drives and Related Components Item Descripti

sOÎv/Ri: © 2001 Compaq Computer Corporation. COMPAQ, the Compaq logo, and Presario Registered U.S. Patent and Trademark Office. Second Edition July 2001. Connectors and their locations may vary by model. Please match the correct colored plug to coordinating port. * Powered speakers are required. er~-^ d Voltage ’"Voltage is preset to the correct rating. If in doubt, contact your local Power Utility. ♦ / ♦ Registration / ♦ /

Compaq Technician Notes WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, do not exceed the level of repair specified in these procedures. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or make modifications to any printed wiring board. Improper repairs could create conditions that are hazardous. WARNING: To reduce the risk of electric shock or damage to the equipment: Dis

and press .Enter.I key. Then press ! or " key to select .Phase. and also press .Enter. key again. Now, press ! orI " to adjust the monitor untill the noise disappears+ To make sure the .iKey. function performs well, you have to use one of the supported modes. IfI the .iKeyi does not work properly and the .NON PRESET MODE. message is on the OSD, itI means you are not using one of the supported modes. Please set your computer to use one of theI supported modes. You will find a list of supported mo

Microsoft and Windows are trademarks of Microsoft Corporation. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. The information in this publication is subject to change without notice and is provided "AS IS" WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE