Leave the tank open for some time without the cap, in a cool place. The power light is green but there is no mist being emitted: . . . . . Check that there is water in the tank. Check for possible lime deposits on the water level float or the nebulizer. Make sure that nothing blocks the vapor output slot. Check that the air vent on bottom of humidifier is not blocked. Empty the humidifier and rinse the water basin with cool tap water and allow to dry for 15 to 30 min. White dust appears and sett

2 General Safety Instructions P.3 List of Main Parts P.4 Tech. Specifications, Contents of Packaging P.5 Operation and Use P.5-8 Maintenance P.8-9 Trouble Shooting P.9 Service Center Information P.lO Warranty Information P.ll Warranty Card P. 12 Order Form P. 13 1 A Thank you for purchasing our CRANE Ultrasonic Humidifier. Each unit has been manufactured to ensure safety and reliability. Before using the humidifier for the first time, please read the instructions carefully, and keep

Please note that the Indicator Light will stay on. The light indicates that the humidifier has power and is turned on. OPTIONAL HUMIDIFIER FILTER (Filters are not included with the humidifier and can be purchased separately from Crane USA.) A humidifier filter is an optional accessory for your Crane Cool Mist Humidifier. Filters are used to reduce white dust caused by hard water. Soak humidifier filter in water for 30 minutes to activate performance. Place humidifier filter inside Water Basin

& Fig. 2 (Top of Water Tank) 4. Mist Outlet Channel 5. Water Tank Handle Fig. 2 Fig. 3 (Water Basin) 3. Indicator Light 6. Nebulizer 7. Mist Chamber 8. Fan Vent 9. Valve Opener 10. Water Level Sensor 6\ 7 1# ^-9 3—-► . Fig. 3 Fig. 4 (Bottom of Water Tank) 11.Water Tank Valve 12. Water Tank Cap 13. Mist Outlet Channel 12 13s- « i ( O-—il Fig. 4 Fig. 5 (Water Tank Lid) 14. Water Tank Lid 15. Mist Output Slot Fig. 5 4 TECHNICAL SPECIFICATIONS: Rating Voltage 120V Frequency 60Hz Power 38W

CALL US FOR PROBLEMS AND QUESTIONS. WE CAN HELP. If you experience unsatisfactory operation, first refer to the troubleshooting section in manual to ensure that it is not due to care of cleaning. Follow Care and Cleaning Instructions. You can also visit customer service. If you have any questions or comments please call our Crane Service Center 1-888-599-0992 or e-mail Crane Customer Service Center, customer-service@crane-usa.com. Please specify style and model number. Our Customer Service Rep

Add 2 Tablespoons of white vinegar. Shake vigorously and allow to sit for 20 minutes. Shake vigorously again and empty the water. Rinse water tank a few times to get rid of the vinegar smell. 4. Make same white vinegar water solution. Pour into water basin. Let sit for 20 minutes then empty. Rinse with only water a few times to remove any vinegar smell. Wipe with a clean soft cloth. Wipe dry. 5. Wipe the exterior surface water tank and water basin with a soft, dry cloth. NEVER IMMERSE WATER B

This safety feature uses a water level sensor to stop the nebulizer once the water level sinks below the required level in the water basin. A small orange light will appear to indicate that the humidifier has automatically turned off. Turn the humidifier off and unplug before removing and refilling the water tank. HOW TO REMOVE AND ATTACH MIST CHANNEL 1. To remove mist chamber, slide mist chamber latch to left. Lift mist chamber off of the water basin. 2. To attach the mist chamber slide mist

Change the location of the humidifier or reduce the output of the other room conditioning appliances. correct 7 A NOTE ABOUT HUMIDITY ■ It is best to keep the humidity level at about 40%-50% of relative humidity. ■ The comfort level of humidity will vary from room to room and with changing room conditions. ■ In cold weather, windows and even some walls may fog or develop frost from excessive indoor humidity. If this occurs, reduce the mist intensity setting to avoid damage from condensed w

Shake vigorously again and empty the water. Rinse the Water Tank a few times to get rid of the vinegar smell. 4. Make the same white vinegar water solution and pour into the Water Basin. Let sit for 20 minutes then empty. Rinse with only water a few times to remove any vinegar smell. Wipe dry with a clean soft cloth. 5. Wipe the exterior surfaces of Water Tank and Water Basin with a soft, dry cloth. NEVER IMMERSE WATER BASIN IN WATER. END-OF-SEASON MAINTENANCE 1. Remove the Water Tank from t

1 (Central Body) 1. Central Body (water basin) 2. Control Knob ON/OFF 3. Power Indicator Light (NOTE: Depending on the model, your humidifier may have one or two indicator lights.) 1 2 r ' 3 Fig. 2 (Top of Water Tank) 4. Mist Outlet Channel 5. Water Tank Handle (NOTE: Shape of Water Tank depends on model #) Fig. 3 (Water Basin) 6. Water Level Sensor 7. Nebulizer 8. Valve Opener 9. Fan Channel 10. Mist Chamber (NOTE: Shape of Water Basin depends on model #) 6 7 8 9 10 Fig. 4 (Bottom of Water