•Reduce the risk of the saw chain breaking or jumping off the bar. •Obtain optimal cutting performance. •Extend the life of cutting equipment. •Avoid increasing vibration levels. General rules •Only use cutting equipment recommended by us! See instructions under the heading Technical data. •Keep the chain’s cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge. A damaged or badly sharpened chain increases the risk of accidents. •Maintain the correct depth g

Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain. Long-term storage Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule. Starting and stopping WARNING! Note the following before starting: The chain brake must be engaged when the chain saw is started to reduce the chance of contact with the moving ch

Improper use of this appliance can cause severe injury or death. Keep this manual for future reference. Double Insulated 118034 REMINGTON® ELECTRIC BLOWER/VAC | iII table of contents 1 Important Safety Information 1 2 Product Identification 3 3 Blower/Vac Assembly 4 Assembling Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Converting from Blower to Vacuum . . . . . . . . . . . . . . . . . . . . 5 4 Blower/Vac Operation 7 Extension Cords . . . . . . . . . . . . . . . . . . . . . .

The smaller the gauge number,the larger the cord.To reduce theriskofdisconnectionof blower/vacfrom the extension cord during operation,use the cord hitch described in this manual. Cord Length AWG Cord Size 25 feet 50 feet 100 feet 150 feet 16 AWG 16 AWG 14 AWG 12 AWG To reduce the risk of electric shock, this blower/vac has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord.The blower/vac’s plug will fit into a polarized extension cord onl

WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain. IMPORTANT: Do not clamp chain saw in vise during assembly. Continued CHAIN SAW NAMES AND TERMS Continued 5. Rotate guide bar retainer 90 degrees as shown in Figure 5. 6. Place chain around drive sprocket, along top groove of guide bar, and around guide bar nose. Note: Make sure cutting edges of chain are facing in right direction. Position chain so cutting edges on top of guide bar face guide bar nose (see Figu

Step 2a Step 3 Step 2b ® ELECTRIC CHAIN SAW OWNER’S MANUAL IMPORTANT! Failure to follow these instructions when tensioning saw chain will damage saw and void the warranty. For additional information see owner’s manual or call 1-800-858-8501. Make sure chain moves freely around guide bar then tighten nut. LOOSEN Loosen nut... If chain becomes loose around guide bar, allow chain to cool then... TIGHTEN Turn chain tensioning screw clockwise to tension saw chain... TIGHTEN WARNING: Unplug saw and al

is not smooth but is rough or binds. Lack of proper cleaning. Inspect and clean complete tool. Replace worn or damaged parts. application Chart power load and power fastener application information. For fastening power fastener power load this: to this: length color 119586 0 application Chart Power load listings are recommendations only. If you are in doubt, try a test fastening using the next lightest power load. Power fasteners and power loads are available in blister packs of 5 and cartons of

Service When servicing, use only identical replacement parts. Storage When not in use, always store saw • with battery removed • in a high or locked place, out of children’s reach • in a dry place • with scabbard over guide bar • indoors Save these instructions. It is your guide to safe and proper operation of this saw. POLESAW TRIMMING PRECAUTIONS Never stand directly under the limb you are trimming. Always position yourself out of the path of falling debris. Never stand on a ladder or other ty

If the extension is to be used outside, the cord must be suitable for outdoor use. Any cord marked for outdoor use can also be used for indoor work. The letters “W” or “WA” on the cord jacket indicate that the cord is suitable for outdoor use. b. An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety, and to prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity th

Improper use of Pole Trimmer can cause severe injury or death. Keep this manual for future reference. ® ELECTRIC POLE TRIMMER SAFETY WARNINGS WARNING:Whenusingelectric PoleTrimmers,basicsafetyprecautions should always be followed to reduce the risk of fire, electric shock, and personal injury. WARNING: This product contains chemicals known to the State of California to cause cancer or birth defects, or other reproductive harm. BEFORE OPERATING POLE TRIMMER READ ALL INSTRUCTIONS BEFORE OPERATING