The signal is then controlled via the CH-1 and CH-2 faders (4). • The XDM-343 features three microphone inputs. The Canon Mic 3 jack (10) on the front panel is for 1/4” (6.3mm) jack plugs and XLR-plugs. With the TALKOVER switch (1 1), you can attenuate all other signals without affecting the microphone volume. The XDM-343 also features two more 1/4 inch (6.3mm) Mic jacks (27, 28) on the rear panel. You can adjust the microphone volume using the CHANNEL faders. Make sure that the respective PHONO
The TTB-2500 requires some assembly. Please read the following instructions before installing or using your new unit. The TTD-2500 has a 2 year limited warranty! CAUTION! -Keep this device away from rain and moisture! Name of Parts 1. 45-rpm Adapter 2. Turntable Platter 3. Center Spindle 4. Power Switch 5. Start/Stop Button 6. Strobe Dots 7. Target Light 8. LED display for speed indication Green LED: pitch control (11) is in center click position and the speed is quartz-controlled. Red LED: pitc
6. Inset the headshell into the front end of the tonearm, then turn the lock nut counterclockwise clockwise with the headshell firmly held horizontally. 7. Slide counterweight onto tonearm. Twist it lightly and it will screw onto the rear shaft of the tonearm. 8. Adjustment of horizontal zero (0) balance and stylus pressure: (a) Remove the stylus protector, do not touch the stylus tip during the adjustment. (b) Set the cueing lever to the lower position. (c) Release the arm clamp and lift the to
THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICE TO YOUR AUTHORIZED AMERICAN DJ AUDIO DEALER. The lightning flash with an arrow triangular symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure, and may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point triangular symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the u
Tel: +886 2 89431966 Fax: +886 2 89434944
XDM-2221 “SKILZ” The Ultimate DJ Scratch Mixer! Main Features • 2 phono, 2 line, 2 auxiliaries, & 1 microphone input • Hamster Switch for changing cross fader postion • -30dB Rotary Kills for treble, bass & mids • Changeable transformer switch to up/down or left/right • Equipped with high quality Alps Feather Fader™ (FF-3) Crossfader(replaceable/made in Japan) • Fader Curve Switch - changes from a normal curve to a quick curve (for crabbing) • Separate gain control for each channel • Bass, mid &