Modular Control Block Options A1 - Full Feature Block l Pneumatic signal ports for stop, start and cycle complete l Facility for using proximity switches to sense depth and datum positions l Control of feed and retract speed A6 - Simple Control Block l Forward and retract port for control via remote valves l Facility for using proximity switches to sense depth and datum positions multiple spindle and tapping heads General Information l All performance data is obtained at a line pressure of 6.3±0
Numero de Catalogo CP8750 IMPACT WRENCH CLE A PERCUSSION LLAVE DE IMPACTO TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE REDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL OPERADOR. GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below, may result in electric shock
/ NO : 6159939020 Techmotive P/N : 39-30-40409 DECEMBER 2005 CP Techmotive 22705 Heslip Drive Novi, Michigan 48375 USA 24-Hour Technical Support Toll Free in the U.S. and Canada: 1-877-224-7377 All other countries: (001) 248-348-6280 between 8 a.m. and 5 p.m. Eastern Standard Time (EST) NOTE: Chicago Pneumatic Tool Company (CP) in 2005 acquired and changed the name of GSE tech-motive tool to CP Techmotive. Product Information may be found on NOTE: The part number for the Visual Supervisor (VS) s