. . AND WELCOME TO YOUR NEW WORLD OF BETTER LIVING WITH SOFTENED WATER. If this is your first experience having soft, conditioned water in your home, you’ll be amazed at the marvelous difference it makes. We promise that you’ll never want to be without it again. We hope you will become familiar with this Guide so that you will better understand how your new appliance works, and how you can help it give you the many benefits of softened, filtered, conditioned water. SODIUM INFORMATION: Water soft

Never use harsh, abrasive cleaning compounds or those which contain acid, such as vinegar, bleach and similar products. 3 WARNING: Protect your water conditioner and the entire drainline from freezing temperatures. DANGER: If your unit should freeze, do not attempt to disassemble it. Call your Culligan Dealer. 4 The timer is very accurate. Keep time-of-day setting correct to assure recharging at the proper time. 5 Should service, adjustment or trouble-shooting information be needed which is not

Failure to do so may result in cracking of the filter and water leakage. NOTE: Make certain that installation of this system complies with all state and local laws and regulations. FOR COLD WATER USE ONLY. MAINTENANCE: Contact your area retailer for replacement cartridges and pricing or call Culligan Customer Service at 800-634-1455 for the nearest dealer. Change cartridge every 2500 gallons or approximately every 12 months. Filter Installation Instructions (For copper or plastic tubing) NOTE:Sh

It is recommended that, before installing a water treatment system, you have your water supply tested to determine your actual water treatment needs. This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42/53. Model FM-15 Substance Influe

01881923 Rev. D 01/06/03 DCO# 5378 Culligan® Preferred™ Series Drinking Water Filters Installation, Operation, and Service Guide SPECIFICATIONS Operating Pressure Range: 10 - 125 psi (0.7 bar - 8.6 bar) Operating Temperature Range: 35 - 100°F (2 - 38°C) Service Flow Rate: 0.5 gpm (1.9 Lpm) Capacity: 750 gal. (2,839L) Preferred 150 1000 gal. (3,785L) Preferred 250 300 gal. (1,135L) Preferred 350 For cold water use only NSF/ANSI 42 NSF/ANSI 53 ANSI ACCREDITED CERTIFICATION PROGRAM NSF's Certificat

This simple test can be done quickly by your dealer. The Good Water SentryTM Water Quality Monitor is another way to keep track of your system’s performance. This optional accessory checks your drinking water each time you use the special faucet, and signals when the membrane filter may need to be replaced. If the water quality of your system seems to have declined, drain the storage tank and allow the system to refill. If the problem persists, call your Culligan Man for service. INSTALLATION Th

**The efficiency rated dosage is only valid at the 6.0 lb. salt dosage. Buyer Signature _____________________________________________ Date __________ Seller Signature _____________________________________________ Date __________ Performance Data Sheet Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance. It’s because of this and more than sixty years of commitment to customer satisfaction that Culligan is providing this

The number of gallons of hard water that can be softened by the Cullex resin column before it needs regeneration is called the “capacity” of the resin column, and depends upon the amount of hardness minerals in each gallon of water (expressed as grains per gallon) and upon the amount of regenerant brine solution (expressed as pounds of salt) passed through the resin column during regeneration. Your Culligan serviceperson, taking into account the hardness of your water and the amount of softened

Trust Culligan for the best water you can get, anytime you want it. Our goal is to provide you with the highest quality water, and the best possible service. For your home. For your health. For your family. Operating Specifications Pressure Range: 30–125 psi (2.1–8.6 bar) Temperature Range: 40–100°F (4.4–38°C) Rated Service Flow: 0.5 gpm @ 60 psi (1.9 Lpm @ 4.1 bar) Filter Capacity: CT-2: 400 gal. (1514 L)* *Filter cartridge life varies depending on usage and water conditions. Estimated filter l

DANGER: If your unit should freeze, do not attempt to disassemble it. Call your Culligan Dealer. 4 Important: Culligan water softeners are sold for use on potable water, only. If at any time the water becomes contaminated, such as during a “boil water” situation, the operation of the water softener should be discontinued until it is verified that the water is again potable. To do this, push the red knob on the back of the water softener against the barrel of the bypass valve. Then, call your Cul