Your complete satisfaction is very important to us. GefenTV GefenTV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you find your solutions.. Don’t see what you are looking for here? Please call us so we can better assi

c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Extender for HDMI 1.3 Over CAT-6 is a trademark of Gefen Inc. © 2008 Gefen Inc., All Rights Reserved All trademarks are the property of their respective companies Rev X1 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel

How It Works This plug and play installation takes mere seconds. You simply connect the extension cable on one side of the DVI Booster and the display’s cable on the other side. The DVI Booster sits between the end of your DVI cable and your display. You also have the option of connecting another DVI cable to the Booster, daisy chaining Boosters and cables for greater distances. 1 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI BOOSTER • The DVI Booster is powered passive

6 DVI-I Output This DVI-I output port will support an analog or digital output display device. A DVI to VGA adapter will be required when using a VGA capable display with this output port. 7 DVI/RS-232 and VGA/Audio RJ-45 Ports These RJ-45 ports connect the CAT5•4000 receiver to the CAT5•4000 sender unit using CAT-5, CAT-5e or CAT-6 cabling. When using an analog or digital video source on the channel 1 input, connect the CAT-5 cables according to the labels on both the sender and receiver units.

C/O Customer Service 20600 Nordhoff St. Chatsworth, CA 91311 support@gefen.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 1x4 HD Splitter is a trademark of Gefen Inc. © 2007 Gefen Inc., All Rights Reserved TABLE OF CONTENTS Introduction Features Panel Descriptions Connecting and Operating the 1x4 HD Splitter Specifications Warranty INTRODUCTION Congratulations on your purchase of the ex•ten

c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Mini 1:8 Splitter for HDMI 1.3 is a trademark of Gefen Inc. © 2009 Gefen Inc., All Rights Reserved All trademarks are the property of their respective companies Rev A CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting A

2 Internal EDID LED This LED will activate only when the pre-programmed internal EDID is being used. Please see page 6 for more details on the internal EDID. 3 External EDID LED (default EDID routing) This LED will activate only when the external EDID is being used. Please see page 6 for more details on the external EDID. 4 Link LED This LED will activate when a valid link between the source and the splitter is detected. 5 EDID Button This button will activate the onboard EDID. Press this button

1 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI DL TO HDMI CONVERTER • The DVI DL to HDMI Converter has 2 switches per input (4 inputs are provided). The Master Switch will allow the use of the 10-bit and 12-bit color modes. Once the main switch is in the ON position, 10-bit or 12-bit color modes can be selected. Disable the Master Switch to turn off the extended color modes and enable 8-bit color depth. 2 FEATURES Features • Converts up to 4 proprietary DVI-DL signals

The 1:2 Component Audio over CAT5 Receiver unit connects to your remote HDTV component video displays, and audio inputs. Note: Both analog and digital audio outputs are active on the receiver side when two-channel analog audio is used. If multi-channel digital audio is used, then the analog audio outputs will be inactive. 1 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 1:2 COMPONENT AUDIO OVER CAT5 • Use only industry standard Category-5 Enhanced (CAT-5e) cable to operate t

Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenc