INFORMATION 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-891-2028 E-MAIL krell@krellonline.com WEBSITE This product is manufactured in the United States of America. Krell® is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. All other trademarks and trade names are registered to their respective companies. © 2003 by Krell Industries, Inc. All rights reserved Overview This document

45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-891-2028 E-MAIL krell@krellonline.com WEBSITE This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC). Do not place the integrated amplifier where it could be exposed to dripping or splashing. The ventilation grids on the top and bottom of the KAV–300iL must be unobstructed at all times during operation. Do not place flammable material on top of or beneath the component. When making con

cable to other Krell components and to other devices 10 S-Video Output that incorporate 12 V power on/off trigger input. One S-Video output with a DIN connector. When the KID is in the operational mode and a trig- ANALOG OUTPUTS ger is enabled, the 12 VDC Out provides 12 V of DC 11 Single-ended Audio Outputs output. When the KID is in the stand-by mode or off, Two single-ended analog audio channel outputs or if a trigger is not enabled, the DC output is 0 V. with RCA connectors. POWER CONNECTION

12 Krell / Papa Dock PAPA DOCK SPECIFICATIONS Frequency Response 20 Hz to 20 kHz, +0, -0.15 dB <0.2 Hz to 110 kHz,+0 dB, -3 dB Signal-to-noise Ratio Wideband, unweighted, referred to full power output: >108 dB “A” weighted: >116 dB Gain: 26.2 dB Total Harmonic Distortion (THD) < 0.03%@ 1 kHz, at 150 W, 8 Ohms < 0.20%@ 20 kHz, at 150 W, 8 Ohms Input Impedance 90 kOhms Input Sensitivity 1.70 Vrms Output Power, each channel driven: 150 Wrms @ 8 Ohms 300 Wrms @ 4 Ohms Output voltage 98 V peak-to-pea

45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-891-2028 E-MAIL krell@krellonline.com WEBSITE This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC). The amplifier must be placed on a firm, level surface where it is not exposed to dripping or splashing. The ventilation grids on the top, bottom, and sides of the amplifier must be unobstructed at all times during operation. Do not place flammable material above or beneath the amplifie

The operating voltage of this unit is determined by the factory and can only be changed by an authorized Krell distributor or at the factory. The voltage for this product in the U.S.A. cannot be changed until six months from the original purchase date. In the event that Krell receives a product for warranty service that has been modified in any way without Krell authorization, all warranties on that product will be void. The product will be returned to original factory layout specifications at t

What is it? A. Check that the shorting pins for the Showcase Amplifier are inserted into the XLR inputs (the unit is shipped with the pins in place). When using the single-ended inputs, shorting pins must be inserted between pins 1 and 3 to keep external noise from corrupting the signal. For more information, see Connecting the Showcase Amplifier to Your System, on page 10. Q. I cannot turn the amplifier on. Why not? A. Make sure the stand-by LED is not flashing. If the stand-by LED is flashing,

Krell® is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. Theater Throughput™ Is a trademark of Krell Industries, Inc. All other trademarks and tradenames are registered to their respective companies. KAV-300i Remote Control Integrated Amplifier v 00.0 © 2000 by Krell Industries, Inc. All rights reserved P/N 303854 2 3 3 4 5 6 8 10 11 12 13 TABLE OF CONTENTS INTRODUCTION UNPACKING AN

INTRODUCTION Welcome to the Krell family of audio components. You have joined a select gro.up of discriminating listeners who enjoy the finest in music reproduction. Krell Digital (KDI) is dedicated to the development technologically advanced components for the reproduction of dlgita.lly recorded music. These designs continue the Krell tradition of ~ncompromising perf6rmance through leading-edge technology. This Owner’s Reference is divided into several sections, each designed to perform a diffe

2 INSTALLATIONGUIDE........................................... 2 INSTALLATIONSITES........................................... 2 ,PLACEMENT.................................................... 3 CONNECTIONS................................................ 3-4 POWERUP ..................................................... 4 QUESTIONSANDANSWERS.................................... 4-5 SBP-64XDESIGNFEATURES................................... 6-7 TECHNICALASSISTANCEGLOSSARY............................ 7-