• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear. • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended. • Always unplug heater when not in use. • Do not operate any heater with

In about a minute the internal fan will come on delivering hot air into the room. PERFORMANCE RECOMMENDATIONS To assure the best performance of the heater, the following are suggested: For maximum efficiency, locate the heater on an inside wall exhausting towards an outside wall. The heater is not recommended for areas with exposed, un-insulated concrete or metal walls. The heater works most efficiently when relative humidity is higher. Turn on humidification options you may have. Lower your the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Performance Recommendations . . . . . . . . . . . . . . . . . . . .

Do not insert metallic items into the freshener. Do not dismantle the freshener to avoid electric short and damage to internal parts. • Static electric noise caused by moisture content in the air during operation of the freshener is harmless. • Unplug from electric socket when you clean your air freshener. Pull out the dust collector from the top of the freshener and wipe with a soft clean cloth. A mild detergent may be used to clean the exterior. ALL SERVICING SHOULD BE DONE BY AN AUTHORIZE

All rights reserved. All word marks, logos, product configurations, and registered trademarks are owned WWW.ORECK.COM 07/02 and used under the authorization of Oreck Holdings, LLC. This owner’s manual contains IMPORTANT SAFETY INSTRUCTIONS. READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire, electric shock, or injury to persons: IMPORTANT SAFETY INSTRUCTIONS • Read and follow instructions • Use only for intended use as described in this manual. • If applian

White Polish Pad 4. Floor finish liquid 5. Clean string mop, 16-20 oz. size 6. Bucket and wringer 7. Disposable plastic bag PROCEDURE: 1. Place disposable bag inside of bucket with wringer. This will protect floor finish from being contaminated and chemical residue remaining in bucket. 2. Pour quart size container of floor finish into the disposable bag. Amount of floor finish depends on size of floor area to be covered and number of coats to be applied. 3. Dip the mop tip ONLY into the floor fi

8 IV. FEATURES A. MINIMUM AND MAXIMUM TEMPERATURES 1. Press and release the "MIN/MAX" button. "MIN" appears in the temperature LCDs and the recorded minimum temperatures are displayed. 2. Press and release the "MIN/MAX" button to toggle to the maximum temperatures. The time of occurrence of the value for outdoor temperature will also flash. B. RESETTING THE MINIMUM AND MAXIMUM TEMPERATURES 1. To reset both the minimum and maximum temperatures—press and hold the "RESET/+" button for 4 seconds. V.

• Turn fabric shaver on by using the one touch sliding On/Off switch (Item 1). Place fabric you wish to renew on flat surface. Holding the device by its handle, gently move it over the fabric. Pull the fabric as straight as possible to increase the efficiency of the device and the results of the fabric repair. Useful Tips: • Tuck in exposed threads before shaving wool sweaters or any other types of fabric to prevent damage. • Test the fabric shaver on a hidden or inconspicuous area before using

• This appliance is provided with a voltage selector, it can be used on 120 V/230 V main power. This appliance will be set at the factory at 120 volts. Be sure dual voltage selector is in correct position before operating (refer to the General Information Section). • To protect against a risk of electric shock, do not immerse the iron in water or other liquids. • The iron should always be turned OFF before plugging or unplugging from outlet. Never pull cord to disconnect from outlet; instead, gr

• Turn off all controls before unplugging. • Do not use appliance in an enclosed space where flammable, explosive or toxic vapors are given off by oil base paint, paint thinner, some mothproofing substances, or in an area where flammable dust is present. CAUTION This appliance must be connected to a grounded metal, permanent wiring system; or an equipment- grounding conductor must be run with the circuit conductors and connected to the equipment- grounding terminal or lead on the appliance. ALWA