FLAT PANEL REFLECTIVE HEATER Product Information Reflective heating technology warms like the sun, directly warming the person or object in front of it. As surface temperatures rise above the air temperature, they in turn warm the air. Reflective heaters are great for open or large rooms, and actually save you energy by warming objects and not the entire room. Reflective heating is both safe and healthy– it produces no odors, chemicals, or fumes, and doesn’t stir up dust. The surface of our heat

3. Assembly is complete once the RUBBER FEET are firmly attached to the LEG MOUNTS. FIGURE A WHEEL SCREW WHEEL SMALL BLACK SPRING WASHER SMALL GREY WASHER LEG OPERATING INSTRUCTIONS CONTROL PANEL & REMOTE OPERATION 1. Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate heater in upright position with caster wheels attached. 2. Turn the heater on by pressing the On/Off button on the control panel or the supplied remote control. 3. Select a heat

Turn the heater on by pressing the On/Off button on the control panel or the supplied remote control. 2. Select a heat setting. Press the MODE button to toggle between the three heat settings; LOW (500W), HIGH (1000W) and ECO mode. When using the remote control press either MODE button to select the preferred power setting. NOTE: ECO mode is an Economic Energy Saving Function. When ECO mode is chosen the heater will consume one-third less power once the room temperature reaches a certain point.

This easy-to-use manual will guide you in getting the best use of your Air Purifier Please complete the following information for future reference. You will need it to obtain warranty service. Model Number SA-550 Serial Number*: _____ ___ ____ ___ ___ _ ____ ___ ___ _ ____ _ Date of Purchase: __ ___ __ ____ ___ ___ _ ____ ___ ___ _ ____ _ Place of Purchase: ____ __ ____ ___ ___ _ ____ ___ ___ _ ____ _ *The Serial number is located on the back of the unit. Retain this Owner’s Manual with your sal

20. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. Qualified personnel should perform all servicing only. 21. Connect to properly grounded outlets only. 22. SAVE THESE INSTRUCTIONS. WARNING: This heater has a voltage rating of 120 volts. The cord has a plug as shown in A. An adapter as shown in C is available for connecting three-blade grounding-type plugs to two-

Only operate the heater when it is in the upright position. 1. To operate as a HEATER: Press the ON/OFF button on the control panel. 2. Once the heater is on, press the MODE button to choose the desired heat setting. The icon on the display showing three wavy vertical lines is HIGH (1500 Watts), the icon showing two wavy vertical lines is LOW (750 Watts), and the E icon is for ECO mode. In ECO mode, the heater will heat to the set thermostat temperature, and then decrease the power usage by 1/3

1-800-934-9194 LOCATION AND INSTALLATION (CONT.) CONNECTING THE POWER 1. Turn off the power at the main service 2. Remove the screw from the back of the unit to connect the power to the heater. 3. Attach the cable connectors to the unit and slide the 10 gauge wire through the cable connector. NOTE: For certain applications, conduit may be required. Check your local electrical codes. If you run the wiring in conduit and wish to be able to rotate the heater, be sure to purchase enough flexible con

Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below: Store Name: ____________________________________________________ Location: ______________________________________________________ Date Purchased: _________________________________________________ Seria

To protect against electrical hazards, DO NOT immerse in water or other liquids. 8. DO NOT touch the control panel or plug with a wet hand. 9. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over. 10. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. 11. To prevent a possible fir

If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage. IN THE BOX • MICATHERMIC HEATER • REMOTE CONTROL • REMOTE CONTROL BATTERY • INSTRUCTION BOOKLET • 4 -LEGS • 4 -WHEELS • 4 -RUBBER FEET • 4 -WHEEL SCREWS • 4 -SMALL BLACK SPRING WASHERS • 4 -SMALL GREY WASHERS PRODUCT DIAGRAM CARRY HANDLE DIGITAL DISPLAY CONTROL PANEL LEGS WHEELS ASSEMBLY TOOLS NEEDED: Phillips Head Screwdriver This heater requires assembly of