Scrivi la tua opinione del dispositivo
Scarica la tua
This way it can stay in the oven and is ready to use at anytime. The other racks remain open for sheet pan or Oven Basket placement. Care Instructions: The heat plate is Teflon® coated. This means that cleaning can be done with detergent and water. Do Not use an abrasive; this will compromise the durability of the Teflon® coating. Use caution before removing the piate for cleaning. The piate wiii retain heat long after the oven has been shut down. 3
The oven will operate continuously until you manually turn the dial back to “0”. • Whether you have chosen to set an actual time, or have set the time dial for continuous “on”, the fan will begin spinning, and the green LED will turn on. 3.2 TEMPERATURE DIAL • The temperature inside the cooking chamber is set by the temperature dial (if you’re facing the oven, it is the dial on the right side of the control panel). • Turn the dial clockwise and set your desired temperature. Line up your desired
Box 35020 • Louisville, KY 40232 • USA • email: info@grindmaster.com Models CS-LL/CW-1/CW-1EST230V Shuttle® & Warmer Model CS-LL Model CW-1/ CW-1EST230V Model CS-LL CW-1 CW-1EST230V Voltage N/A 120V 230V/50Hz Kw N/A 0.1Kw 0.1Kw Amps N/A 1 Amp 0.4 Amp Capacity 1.5 gal (5.7L) N/A N/A Dimensions (H x W x D) 9-3/4" x 9" x 14-1/2" (25 cm x 23 cm x 37 cm) 7-1/2" x 9" x 9" (19 cm x 23 cm x 23 cm) 7-1/2" x 9" x 9" (19 cm x 23 cm x 23 cm) Ship Dimensions (H x W x D) 12-1/2" x 10-1/2" x 16-1/4"
Box 35020 • Louisville, KY 40232 • USA © Grindmaster Corporation, 2003 WWW.grindmaster.com • email: info@grindmaster.com PRINTED IN USA 0704 Form # BW-216-02
3 1. Data Plate ....................................................................................................................................... 3 2. Certification .................................................................................................................................... 3 3. Installation - Preliminary Operations .............................................................................................. 3 3.1 – Location of Installation .........................