Choose the proper volume you like_ Press VOL+/- button to adjust the volume. VOLUME 50 If the color of one channel is abnormal It might be because the color has been set improperly.You may follow the instruction below to adjust it. Press SYSTEM button, and you can see the form. • If the color of the picture is abnormal Press CH+/- button, and move the indicator to COLOR, and press VOL+/- button to select the proper color(AUTO, NTSC3.58,NTSC4.43 and PAL will appear alternately). Generally, pl

2. Set the on/off switch (18) to On (the I position). Make sure the brake is ON when starting for safety, by pushing the front guard forward. 3. When the machine is cold first pull out the choke control (18) to the CHOKE position. (Fully withdrawn). Note. Once the choke control has been pulled out, it cannot be pushed back to the run position. 4. Depress the priming bulb (29) 6 times or when the bulb is full of fuel. Note. This is not required if engine is warm or is being restarted. It returns

• Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Service • Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is mai

For shower, you need to quit Medium Warm mode, and press Mode button to enter Real-time Heating / Keeping mode.Then the water can be heated to the setting temperature in a short time.). When water temperature decreases to 34 , machine automatically restarts heating. Heating power level can be manually set with Power button. Example: Fig. 10 shows Medium Warm mode. Press Power button to set power level 2150 W with corresponding indication lighted. The actual temperature then is 52 . When it decre

• Damage to hearing if effective ear protectors are not worn. Wear goggles Wear ear muffs Wear a breathing mask Contents of carton • 1/2” Impact wrench • Kitbox • Instruction manual Assembly The GMC impact wrench is packed, fully assembled except for the impact socket. Please select the required impact socket and insert correctly (refer to the socket change section of this manual). Know your product 1. Drive Shank 2. Trigger Switch 3. Replaceable Brushes 4. Handle/Grip 5. Power Cord 3 1 2 4 5 Un

Assembly The ACALN Allnailer® is packed fully assembled. Adjusting the depth of nail penetration 1. The depth adjustment dial can be set to 4 different positions in order to vary the depth of nail penetration as follows: Depth setting values (approximate only) Position Depth 1 Nail head underflush by 1mm 2 Nail head level with the surface 3 Nail head 5mm proud from surface and suitable for hanging heavy objects (ensure that the mounting surface is capable of taking the weight loading) 4 Nail hea

Rotate it sufficiently for the chuck to open far enough to accept the bit or accessory. 3. Fully insert the bit or accessory into the chuck (1) and tighten securely by rotating the chuck clockwise with one hand whilst holding the spindle lock button (9) pressed with the other hand. WARNING. Do not attempt to tighten the chuck by gripping the front part and turning the drill on. Damage to the tool and personal injury may result. Be sure to tighten the chuck with the spindle lock button held press