Using the Printer Function This chapter describes the printer functions. Using the Copier Function This chapter describes the copier functions. Using the Scanner Function This chapter describes the scanner functions.There are two scanning methods: scanning using the control panel and scanning from the computer (TWAIN scanning). Using the Fax Function This chapter describes the fax functions. Configuring the Machine Using the Control Panel This chapter describes how to configure and adjust the ma
The length of time that the copier uses to recover from the energy saver (auto preheat) function can be selected between within 10 seconds (priority to recovery) and within 30 seconds (priority to power save). (See “Auto preheat time” on page 6-4 and “Preheat recovery time” on page 6-5.) (English text panel) (Symbol panel) 4. Auto shut-off function This function automatically turns the main switch OFF (O) if no copying operation is preformed for a certain period of time (15 to 120 minutes). To m
SD series systems require a CD 300 Pump Controller to provide the performance as shown. 2. Single, 12 Volt module systems require CD 300 Pump Controller to operate at full power. 3. Systems using 2 solar modules should be wired with the solar modules in series. 4. Systems using 4 modules or more should by wired series/parallel. Modules should be connected first in strings of 2 modules in series. These strings should then be paralleled to achieve the required power. *For approximation purposes on
250 sheets face-down (Main Tray), 50 sheets (Job Separator Tray) Print functions Controller language: PRESCRIBE Emulations: PCL 6 (5e/XL), KPDL 3 (PostScript 3 compatible), PDF Direct Print, XPS Direct Print Interface: USB 2.0 (High-Speed), USB Host 2.0, Fast Ethernet 10/100/1,000Base-TX, Slot for optional print server, Slot for optional Memory Card Operating systems: All current Windows operating systems, MAC OS X Version 10.2 or higher, Unix, Linux as well as other operating systems on request