Use care to differentiate rear crossbar (B) (341/2" long) from footrest crossbar (C) (351/2" long). Attach both rear crossbars (B) and the footrest and support crossbars (C) to one side frame (A) using 2" Allen bolts (H). Tighten securely. Note: Threaded barrels preattached to leg frames must be in rear and facing out. Attach other side frame (A) to opposite ends of crossbars in step two using 2" Allen bolts (H). Tighten securely. Place dust cover (D) over top of base frame and attach using %

Connect eyelet to spring ♦ Thread wire around pulleys as shown in wiring diagram ♦ Extend spring approximately 1" beyond unstretched length ♦ Secure wire to second eyelet and trim excess Spare Parts Spare parts can be ordered from your local Alvin dealer. Visit our website for a dealer in your area PXP Kit contains wire, spring, metal side brackets, top adjustment knobs, screws and cable eyelets BX21 21" straightedge blade for PXB21 BX24 24“ straightedge blade for PXB24 BX26 26" straig

Wipe dry ♦ Avoid direct exposure to sunlight or extreme heat ♦ Protect your PXB from damage by storing and transporting in a protective case ♦ Do not move straightedge with brakes tightened; always move straightedge with a smooth, easy motion Adjustments It is recommended that you follow this sequence when making adjustments to the position of the straightedge blade: 1. Set the brakes for optimum braking strength ♦ Unscrew brake knobs as far as they will go. ♦ Retighten brake knobs one f

XII-4-XB Tools Required: Phillips screwdriver, drill with VW bit. Parts Included: A 1pc Leg Frame B 1pc Tabletop C 2pcs Rear Extension Tubes (Shipped in separarate box) : D 2pcs Front Extension Tubes F 2pcs Height Adjustment Knobs To Assemble: Unpack all parts and inspect to confirm that all are present. Unfold base (A). Insert rear extension tubes (C) completely into frame (A) and loosely hand-tighten knobs (F). Insert front extension tubes (D) into frame (A). Place table top (B)

Use care not to drill all the way through the tabletop. ^5 Attach front hinges and rear brackets to tabletop using %" Phillips screws (I). Tighten securely but use care not to over tighten and strip. ©2008 ALVIN & COMPANY, INC. • P.O. Box 188, Windsor, CT 06095-0722 WWW.alvinCO.COm Phone: 860-243-8991 • Toll-Free: 800-444-2584 • Fax: 860-242-8037 • Toll-Free Fax: 800-777-2896 lit-abiss 7/qb

Convenient stay cool handle on head for positioning. 3-diopter glass lens provides 1.75x magnification. Removable protective lens cover makes this magnifier lamp usable as a table lamp. Takes one T5 22w daylight simulation bulb (included). Includes heavy-duty desktop mounting clamp that fits up to 2." thick surfaces. All metal construction. UL listed. No. ML255-B ML255-D ML255-BULB Color Black White Replacement bulb SRP $89.95 ea 89.95 ea 6.95 ea ALVIN® Trim Design Magnifier Lamp Perfect for pre