4.95 Gbps (1.65 Gbps per color) Maximum pixel clock................... 165 MHz Resolution range........................... Up to 1920x1200 or 1080p @ 60 Hz Formats........................................... RGB and YCbCr digital video Standards........................................ DVI 1.0, HDMI 1.2 Video input Number/signal type..................... 1 single link HDMI (or DVI-D*) Connectors ..................................... 1 female HDMI type A Equalization........................

Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) CAUTION - These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions unle

So, aux send buses are not the best solution here. Instead, dynamic processors and equalizers are inserted into the signal path. Once processed, the signal then re-enters the mixing console at the same point where it left. Signal interruption only occurs if a plug is inserted into the corresponding jack (1/4" stereo plug: tip = signal output, ring = input). All mono input channels are equipped with insert points. They can also be used as pre-EQ direct outputs, without signal flow interruption. F

before you get started.............................................S 1.1.1 Serial number.....................................................S 2. CONTROL ELEMENTS...............................................S 2.1 Front panel/surface......................................................S 2.2 Rear panel/side.............................................................7 3. OPERATING MODES AND APPLICATIONS................8 3.1 Selecting an operating mode in CONFIGURATION mode................

2) Press the key. 3) Release the ASSIGN push-button. 4) Define the GLOBAL CHANNEL by operating one of the keys through on the keyboard. 5) Finally, press the key. In order to discard your assignments, please press the key or press the ASSIGN push-button again. The ASSIGN LED will go off in all 3 cases. The factory setting for the GLOBAL CHANNEL is channel 1. 4.2.2 The individual channel assignment The assignment of individual control elements to defined channels is useful if you want to control

No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A A This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenanc