DYMO and LabelWriter are registered trademarks of Sanford, L.P. All other trademarks are the property of their respective holders. Quick Start Guide Follow these steps to install the LabelWriter printer and print your first label. 1. Unpacking your LabelWriter Printer NOTE Do not plug the printer into your computer until asked to do so during the software installation. 1 Unpack your printer and save the packing materials. 2 Make sure you have all the items shown in Figure 1. (Labels included in

If manufacturer determines that a defect of material or in workmanship exists, customers' sole remedy will be repair or replacement of scale at no charge. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. All parts including repaired and replaced parts are covered only for the original warranty period. Who is Covered? The original purchaser of the product mus

Version 7.5 Revised 01/06. No part of this document or the software may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of DYMO Corporation. Trademarks LabelWriter is a registered trademark of DYMO Corporation. All other trademarks are the property of their respective holders. © 2006 DYMO A Division of Newell Rubbermaid DYMO bvba DYMO Corporation DYMO Purchase Registration Industriepark-Noord 30 44 Commerce Road Sanfo

Press o, select Symbols, and press a. The first row of symbols shown in the table appears in the display. . Use the arrow keys to move to the desired symbol. The left and right arrows move horizontally along a row of symbols. The up and down arrow keys scroll vertically through the rows of symbols. . When you locate the symbol, press a to add the symbol to your label. The labelmaker remembers the last symbol used. The next time you choose to insert a symbol, the last symbol that you used is auto

In both of these cases, remove the item from the platform and 0.0TARE press to return the display to 0.0. If you need further assistance, contact Technical Support at (877) 724-8324. You can also obtain support at Warranty ONE-YEAR LIMITED WARRANTY Sanford, L.P., d/b/a Dymo ("Dymo") warrants the Dymo scales to be free from defects in design, materials and workmanship for one year from the date of purchase. If this product is found to be defective within that time, we will promptly repair or repl

3 Remove the label spool from inside the top cover and pull the spool guide from the spindle. Figure 5 4 Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is firmly against the side of the spool. See Figure 5. Slide label guide against labels Slide label guide against labels 5 Slide the spool guide onto the right side of the spool and press the guide tightly against the side of the label ro

Setting Up the Scale The scale is powered through the included power adapter. Optionally, the scale can be powered by six AAA batteries. Unpacking the Scale The scale comes with a serial cable for connecting the scale to your computer. To unpack the scale 1. Unpack the scale. 2. Set the scale on a firm, flat surface. 3. Plug the RJ11 end of the cable into the RJ11 connector on the back of the scale. 4. Plug the other end of the cable into an available serial port on your computer. If your comput

It highlights changes in system requirements, new features, and known problems. Please read this document carefully! NEW IN THIS RELEASE This release includes: . Support for LabelManager 420P and LabelManager PnP printers . Support for ACT! 2011 and QuickBooks 2011 . Developers Please Note: DYMO has a Software Developer’s Kit (SDK) for all supported printers. See the for more information. SYSTEM REQUIREMENTS Operating System Support Windows XP SP2 or later Windows Vista (32-bit or 64-bit) Window

• Consult the dealer or an experienced radio/TV technician for help. Electrostatic Discharge Precautions Electrostatic discharge (Static Electricity or ESD) can cause damage to any electronic device, including the scale. To avoid damage, follow these simple steps: • Always disconnect the scale from your computer or USB hub when changing the battery. • Always discharge any accumulated static electricity from yourself before connecting the scale to your computer or USB hub. If your computer uses a

When using Smart Paste, the list separator character is based on the Windows list separator (or regional setting) being used. For example, the following lines of text (delimited using commas): DYMO Corp., 44 Commerce Road, “Stamford, CT 06902” Esselte, 48 South Service Road,“Melville, NY 11471” will print two three-line labels: one for DYMO and one for Esselte. DYMO Corp. 44 Commerce Road Stamford, CT 06902 Esselte 48 South Service Road Melville, NY 11471 In another example, the following three