. Load Button This function allows the dishwasher to wash dishes using only the upper rack if there are not enough dishes for a full load. This will allow you to save on water and energy consumption. To select . load: 1. Select the programme and then press the . load button (Fig.2-17) – the . load indicator blinks. 2. Close the door. The programme starts automatically. To cancel the . load 1. Open the door slightly. 2. Press the programme button and hold it in for about 3 seconds. Please keep in

Use proper pan size-select pans having flat bottoms large enough to cover the surface unit’s heating area. The use of undersized pans will expose a portion of the surface unit to direct contact and may result in ignition of clothing. Proper relationship of pans to surface unit will also improve efficiency. Do not allow anyone to climb, stand or hang on any part of the cooker. Do not use aluminium foil to cover shelves, linings or the oven roof. Make sure that your kitchen is well ventilated at a

Your safety is of paramount importance. If you are unsure about the meaning of any of these warnings contact the Helpline. • INSTALLATION • Any installation work must be undertaken by a qualified electrician or a competent person. • This hood must be installed in accordance with the installation instructions and all measurements must be adhered to. • If the cooker hood is installed for use above a gas appliance then the provision for ventilation must be in accordance with the latest edition of t

• Fix the pipe in position using sufficient pipe clamps (not supplied). • Remove any activated charcoal filters. RECIRCULATION VERSION AIR OUTLET • Insert the connection extension pieces laterally 14.1 in connection 15. • Insert the Connector 15 into the Support bracket 7.3 and fix it with a screw. • Make sure that the outlet of the extension pieces 14.1 is horizontally and vertically aligned with the chimney outlets. • Connect the air outlet connection 15 to the hood body outlet using either a

This symbol on the product or its packaging indicates that the product may not be treated as household waste. Instead it should be handed over your local community waste collection/ recycling centre. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused. For more detailed information about recycling of this product, please contact your local council, your household waste dispo

T1 0/1 Motor on First speed. When pressed for about 2 seconds the motor is switched off. T2 Speed on Second speed. T3 Speed on Third speed. T4 Speed Fixed Max. speed Flashing Intensive speed. Suitable for the strongest cooking vapours and odours. The function becomes active when the button is pushed for about 2 seconds. After 10 minutes of functioning it turns off automatically. This function can be interrupted by means of pressing any of the buttons. S1 Led Fixed Indicates that the Metal grease

• Connect the air outlet connection 15 to the hood body outlet using either a flexible or rigid pipe o 150 mm, the choice of which is left to the installer. • Ensure that the activated charcoal filters have been inserted. EN 7 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed

THIS APPLIANCE CAN BE A POSSIBLE FIRE HAZARD IF THE GREASE FILTERS ARE NOT CLEANED AND THE CHARCOAL FILTERS REPLACED AS RECOMMENDED. Replacement charcoal filters may be purchased by returning the enclosed order form, or by telephoning 01803 296155 if you wish to pay by credit card. 6 MAINTENANCE AND CLEANING LIGHTING The canopy is fitted with three 20W halogen spotlamps. If one of the spotlamps fails to function check that the two pins are correctly inserted into the lamp holder. To replace a sp