(All 4 Models have 4 position skids) Driveline Shear Bolt Standard, Slip Clutch Optional Approximate Weight 366 lbs 418 lbs 470 lbs 532 lbs Warranty 1 year limited warranty FEATURES Available in major tractor colors SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

This could damage the unit, property, or cause serious injury to bystanders or the operator. WARNING: Throttle Control Idle ( ) Fast ( ) Primer Bulb Off Top View Blue Lever Operate this unit only in a well- ventilated outdoor area. Carbon monoxide exhaust fumes can be lethal in a confined area. WARNING: Avoid accidental starting. Make sure you are in the starting position when pulling the starter rope (Fig. 4). To avoid serious injury, the operator and unit must be in a stable position while sta

13. Keep your work area clean. Immediately remove split wood around the machine so you do not stumble over it. 14. Never move this machine while the engine is running. 15. This machine should not be towed on any street, highway or public road without checking the existing federal, state, or local vehicle requirements. Any licensing or modifications such as taillights, etc., needed to comply, is the sole responsibility of the purchaser. If a “Statement of Origin” is required in your state, see yo

NEVER put your hands inside the chipper chute — serious personal injury can resultl Short stubs of branches may be pushed through the chipper with the next branch. • If the engine slows down under load, reduce feed pressure and allow the engine to regain full speed before continuing. Overloading the chipper could result in damage to the belt or engine. NOTE: If the chipper is not cutting branches efficiently, the chipper blade could be dull, or the wood could be particularly hard. Try processi

769-00088.fm (2/2002) Operator’s Manual IMPORTANT: Read safety rules and instructions carefully before operating equipment. TROY-BILT LLC. P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forestcovered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it sh

Ref. 2 (A) 1 15 1107383 Washer-Flat, 3/8........................ ... 2 1901271 Handlebar, Upper - Incl. Ref. 2 (B) 1 16 1100044 Bolt-Hex Hd., 5/16-18x3/4...... ... 2 2 1916928 Decal-Forward Clutch Bail............ 1 17 55081 Support, Handlebar (A).............. ... 2 3 9854 Bolt-Curved Hd„ 5/16-18 x 1-1/2.. 6 1902173021 Support, Handlebar (B).............. ... 2 4 1100806 Bolt-Hex Hd„ 1/4-20x1-1/4......... 1 18 1110107 Locknut-Hex Hd., 5/16-18......... ... 2 5 55044 Bracket, Cable........

This limited warranty shall only apply if this product has been operated and maintained in accordance with the Operator’s Manual furnished with the product, and has not been subject to misuse, abuse, commercial use, neglect, accident, improper maintenance, alteration, vandalism, theft, fire, water or damage because of other peril or natural disaster. Damage resulting from the installation or use of any accessory or attachment not approved by Troy-Bilt LLC for use with the product(s) covered by t

A/R 1166-4 Shim, 0.010” Thick...................... A/R 1166-5 Shim, 0.005” Thick...................... A/R 4 1086 Bushing, Bronze .......................... 4 REF PART No. No. DESCRIPTION QTY. 5 1916722 5 1916741 5 1916739 6 9305 7 1132-2 8 1904278 9 1915074 10 1104 11 1916542 Wheel Shaft (A) ........................... 1 Wheel Shaft (B) ........................... 1 Wheel Shaft (C) ........................... 1 Key, Hi Pro, 1/4 x 1...................... 1 Spacer ...............................

F. Depress the LOCK/OFF button with your right thumb. Squeeze the trigger with your index finger (Fig. 7). G. While the motor is running, activate the Chain Brake® by rolling your left hand forward against the lever. H. Chain and motor should stop abruptly. If the chain andWARNING: motor fail to stop when the Chain Brake® is engaged, take the saw to the nearest Authorized Service Center. Do not use the saw if the Chain Brake® is not in proper working order. EXTENSION CORDS When using an electric