Failure to do so may result in damage to the gate or injury to your child. Your HearthGate™ is completely assembled and folded compactly and must be unfolded in sequence. Unpack your HearthGate™ onto WARNING ! • Intended for use with children from 6 months through 36 months. • Check the stability of the gate and tighten all hardware and mountings regularly. • To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions. • Never use with

Ensure mounting surface (wall, door frame, stairpost etc.) is strong, rigid and has an even surface. If using gate on a stairway, it must be placed either on top stair or on lowest stair at the bottom. Mounting Hinge Side Screws provided are for mounting directly into wood. If mounting into brick, drywall or other surfaces, use appropriate hard ware. If installing into hardwood (i.e. oak), drilling a pilot hole may be necessary. Hold template (a) against mounting surface, making sure end marked

User Guide FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE This gate is designed for children from 6 months to 36 months. Since each child’s skills develop at different ages, these age parameters should be monitored against your child’s own development. Intended for use with children from 6 months through 36 months. Check and tighten all hardware and mountings regularly. To prevent serious injury or death, securely install gate or enclosure and use according to manufacture

Spindles may be extended a minimum af 1” but not more than 4” on each side. Adjust gate sections until gate is approximately right width and adjustment holes are aligned top and bottom. Sections should fit without any distance between bars. Gate sections must not be extended any further than 4 adjustment holes from spindle ends of gate and holes must overlap at two places on both the top and bottom railing. Place one set of expansion screws and screw sockets (i and j) in top and bottom set of ov

KidCo will either repair, or at our option replace, free of charge, any parts necessary to correct defects in material or workmanship during the warranty period. This warranty is complete and exclusive. The warranty expressly disclaims liability for incidental, special and consequential damages of any nature. Any implied warranty arising by operation of law shall be limited in operation terms of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential da

Since each child’s skills develop at different ages, these age parameters should be monitored against your own child’s development. The gate must be installed in a structurally sound opening. Never install between two railings or stair posts. Ensure mounting surface (wall, doorframe, stair post etc.) is strong, rigid and is smooth, clean and grease free. If mounting to brick, dry wall or other surfaces, an optional gate installation kit, wooden board mounted to the surface or additional hardware

3 Parts Check List............................... 4 Assembly and Installation ....................... 5 Operation.................................... 5 Warranty..................................... 6 Parts Price List................................ 15 Method of Payment............................ 16 Illustrations................................... 19 Guide d’utilisation Introduction.................................. 7 Liste des Pieces............................... 8 Montage et installation.....

User Guide Angle MountTM Safeway® Gate Model G22a for openings 28” - 421/2” Optional 10” extension Model G22-10 for openings 42” - 63” wide Only two extension kits recommended per gate Barriere Angle MountTM Safeway® Modele G22a pour les embrasures de 71 a 108 cm Rallonge facultative de 25 cm Modele G22-10 pour les embrasures de 107 a 160 cm Maximum de deux rallonges recommandees par barriere Reja Angle-MountTM Safeway® Modelo G22a para aberturas de 28” - 421/2” Extension opcional de 10” modelo

The hinge side of gate must be mounted to a rigid surface. Ensure mounting surface (wall, door frame, stairpost, etc.) is strong, rigid and has an even surface. If using gate on a stairway, it must be placed on lowest stair at the bottom. 2. The correct width will be achieved by adjusting gate sections and all four corner spindles. Each spindle adjusts individually and may be extended varying lengths to allow for molding, uneven walls, etc. Spindles may be extended a minimum of 11/4” (hinge side

Tighten nut TOWARD GATE FRAME until locator drops and rests on bottom gate rail. 8. Pull out spindle (b) in the handle side until it touches mounting surface and tighten nut TOWARD GATE FRAME so the distance between pressure plate o) and pressure hinge (area A) is sufficient for walk through door to open in either direction. 9. Close the handle and check all hardware. If correctly installed, gate should be firmly in place. Once opened, the walk through door should operate easily in either direct