Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information for your records. Please return the warranty card enclosed to register your mixer with us. MODEL: DM900 PURCHASED FROM:_________________________ SERIAL NUMBER:__________________ DATE OF PURCHASE:________________________ Numark - The Proven Leader in DJ Technology ©1998 Numark Industries 4 DM900EX IMPORTANT INFORMATION... Plea

Remote zone volume should be controlled from the DM1190. 15. Stereo Auto Peak Hold Level Indicator. This fast, accurate stereo meter tracks the output level. The red LEDs for +3dB, +5dB and +8dB hold program peaks for a second or two. With peak metering, it's OK to be "in the red" as long as +5dB or +8dB aren't constantly lit. Set the crossover, equalizer and power amp inputs to avoid distortion at each step in the audio chain. Proper attention to the peak meter results in the punchiest possible

By reversing direction Channel 2 will be on the left and Channel 1 will be on the right. 10. Transform Buttons are for quickly reversing the crossfader direction in order to create various special effects. Numark - The Proven Leader in DJ Technology ©1998 Numark Industries 6 DM1001X/DM1002X CUE SECTION 11. Cue Assign Toggle is used to route pre-fader channel audio to the Cue Monitor Section. 12. The Program Mix controls the mix of Cue and Program audio in the headphones so that beats can be matc

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information for your records. Please return the warranty card enclosed to register your unit with us. MODEL: ________________________ PURCHASED FROM:_________________________ SERIAL NUMBER:__________________ DATE OF PURCHASE:________________________ Numark - The Proven Leader in DJ Technology ©1998 Numark Industries 2 DM1001X/DM1002X NUM

1 2 34 5 6 7 8 9 10 12 777 7 99 811 1. The Balanced Main Outputs are low-impedance XLR type connectors controlled by the Master fader. 2. The Stereo Main Outputs are low-impedance RCA connectors controlled by the Master fader. 3. The Tape Outputs are low-impedance unbalanced RCA jacks which output the program mix and allow you to connect any recording device. 4. The Stereo Zone Outputs are low-impedance unbalanced RCA jacks controlled by the Zone Level controls. 5. The Send can be attached to an

NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance

Do not attempt to alter this yourself. WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments. -The Leader in DJ Technology ©1999 Numark Industries - 2 - DM905 Blue Dog VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • The crossfader is a user replaceable item and subject to wear. Excessive force can wear ou

Positions near the center provide fine changes in playback speed. Positions further from the center detent provide more drastic changes in playback speed. 28. Effect Level Mix fader. This precisely sets the audible level of the sample in the mix. 29. Memory Bank Select Pushbuttons A-D. Four banks are available for storing samples. To record a bank go to Write and then hit the bank button. You can record into any combination of banks by pressing multiple bank buttons. After sampling, you can eith

What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser. 2. This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical or electrical stress, modification of any part of the product, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use; (d)

The red “beat” LED will remain solid alerting you to which input is ready to start. When the music starts again, the Beatkeeper begins right on the beat and indicates how well the two songs are synced within seconds. Syncing To Off Beats Now if you really want to be fancy, you can actually use the Beatkeeper to sync to the off- beats. You can have two songs going “Boom - Cha - Boom - Cha”. Normally, you would sync the “Booms” of both songs (beat-to-beat mixing). But you can also sync the “Boom”