Hand-Held Installation 1. Remove old showerhead. Clean pipe threads thoroughly. 2. Slightly loosen swivel collar on bracket. 3. Hand tighten pivot ball to pipe. 4. Hand tighten adaptor to showerhead. 5. Hand tighten hose to adapter and bracket. 6. Place showerhead in bracket. drenching rain showerhead Spray Change Button Shower Arm Nut Collar Models: CF-200 CF-201 CF-201C CF-203C CF-209C CF-261 CF-263C Flexible Arm Spray Change Button Bracket Adapter 5’ hose Instruction Manual Flow Control Water

b Confirm the hose is properly installed, try switching ends. c Confirm there is only one washer in the pivot ball. Low water pressure or missing spray patterns a Clean shower head in vinegar/water solution. (See care section). b Clean screen and flow regulator. Leaking at pipe pivot ball connection: a Confirm one single washer is seated on top of the screen. b Grate bar of soap across the j-pipe threads to act as a sealant. Showerhead and/ or bracket stiff to change angle a Immerse pivot ball a

Water Pik, Inc. is not responsible for labor charges, installation, or other consequential cost. The responsibility of Water Pik, Inc. shall not exceed the original purchase price of the product. This warranty gives you specific legal rights. You may also have other rights that vary where you reside. Save your receipt as proof of purchase is required for warranty action. Have any questions or need assistance? If in the U.S., call our toll-free Customer Assistance Line, 1-800-525-2774outside the

3. Hand tighten pivot ball to pipe. 4. Hand tighten adaptor to showerhead. 5. Hand tighten hose to adapter and bracket. 6. Place showerhead in bracket. drenching rain showerhead Spray Change Button Shower Arm Nut Collar Models: CF-200 CF-201 CF-201C CF-203C CF-209C CF-261 CF-263C Flexible Arm Spray Change Button Bracket Adapter 5’ hose Instruction Manual Flow Control Waterpik® brand showerheads are equipped with an OptiFLOW® regulator that limits maximum water flow to 2.5 gallons per minute at 8

Showerhead and/ or bracket stiff to change angle a Immerse pivot ball and large nut of the bracket in hot water or use a blow dryer for several minutes and then use a towel to loosen the large nut. For Fixed Mount: install FM shower head to provide additional leverage to change angle of spray. (Contact Waterpik for further assistance). Care and Cleaning Clean the filter screen at least once a year, or when you notice a drop in water pressure. To remove, unscrew the nut from the pipe. Remove the

Do not attach this product to a plastic shower arm since it may not provide adequate support. Tools are not required. Do not use pipe tape or any other sealants when installing the showerhead. These materials are not necessary and may cause the nut to loosen prematurely. Hand tightening is sufficient to secure the shower thread. Make sure the washer is in the end of the nut. Spray Change Button Guia de solucion de problemas Problema Solucion No hay flujo de agua proveniente del cabezal de ducha

b Confirm the hose is properly installed, try switching ends. c Confirm there is only one washer in the pivot ball. Low water pressure or missing spray patterns a Clean shower head in vinegar/water solution. (See care section). b Clean screen and flow regulator. Leaking at pipe pivot ball connection: a Confirm one single washer is seated on top of the screen. b Grate bar of soap across the j-pipe threads to act as a sealant. Showerhead and/ or bracket stiff to change angle a Immerse pivot ball a

Clean pipe threads thoroughly. Hand tighten pivot ball to pipe. To align unit to shower pipe, loosen nut, reposition shower head. Re-tighten nut. Limited Lifetime Warranty Water Pik, Inc. warrants to the original purchaser of this product that it is free from defects in material and workmanship for as long as the original purchaser owns this product. Water Pik, Inc. will at our election, repair or replace any part of the product which in our opinion is defective, provided that the product has no

When finished empty any excess water from reservoir. Technique Tips for Best Results: Aim the tip just above the gum line at a 90 degree angle. aA ; ■ Starting with the back teeth, follow the H gumline and pause briefly between teeth.| H Continue until all areas around and ^^between teeth have been cleaned. REGISTER YOUR PRODUCT ONLINE NOW! Receive up to $44 in savings. tr.waterpik.com/register 5 7 Water Pik, Inc. 1.800.525.2774 • 1730 East Prospect Road, Fort Collins, CO 80553-0001

When finished empty any excess water from reservoir. Technique Tips for Best Results: Aim the tip just above the gum line at a 90 degree angle. aA ; ■ Starting with the back teeth, follow the H gumline and pause briefly between teeth.| H Continue until all areas around and ^^between teeth have been cleaned. REGISTER YOUR PRODUCT ONLINE NOW! Receive up to $44 in savings. tr.waterpik.com/register 5 7 Water Pik, Inc. 1.800.525.2774 • 1730 East Prospect Road, Fort Collins, CO 80553-0001