Log:

Perlick Z2148EMU

Scaricare : 0 File Size : 35 kb    Produttore : Perlick  
Categoria : Dispenser

Solution: Slowly turn Beer Flow Control Handle to ON position. Problem: Beer does not flow after keg is tapped. Probable Cause: Universal Empty Keg Sensor has locked up. Solution: Turn Beer Flow Control Handle to OFF position. Wait two or three seconds than slowly turn Beer Flow Control Handle to ON position. Probable Cause: Beer Flow Control Handle is OFF. Solution: Slowly turn Beer Flow Control Handle to ON position. Probable Cause: Universal Empty Keg Sensor is dirty. Solution: Clean Universa

Perlick Party Pumps Tapping Equipment

Scaricare : 1 File Size : 57 kb    Produttore : Perlick  
Categoria : Dispenser

40000B Piston Party Pumps Sturdy and easy to use. Has palm-sized handle to pump more air with less effort. Red thermoplastic cylinder; all metal coupler. Convenient vent button to control foaming. Includes two foot vinyl hose with nylon faucet. Easy to disassemble for cleaning. Packed in individual display cartons, 25 per case. Ship Weight: 25 oz. each For Single Valve Kegs Part No. 40000B For Imported Kegs Part No. 40025B Bellows Party Pump Unique polyethylene bellows seals out grit. No

Perlick Z2148

Scaricare : 3 File Size : 68 kb    Produttore : Perlick  
Categoria : Dispenser

Probable Cause: Solution: Beer Flow Control Handle is in CLEAN position. Slowly turn Beer Flow Control Handle to ON position. Problem: Beer does not flow after keg is tapped. Probable Cause: Solution: Smart Coupler has locked up. First, turn Beer Flow Control Handle to OFF position then turn Beer Flow Control Handle to CLEAN position. Wait five seconds then turn Beer Flow Control Handle to ON position. Probable Cause: Solution: Beer Flow Control Handle is OFF. Turn Beer Flow Control Handle to CL

Perlick Z2151

Scaricare : 0 File Size : 68 kb    Produttore : Perlick  
Categoria : Dispenser

Slowly turn Beer Flow Control Handle to ON position. Problem: Beer does not flow after keg is tapped. Probable Cause: Solution: Smart Coupler has locked up. First, turn Beer Flow Control Handle to OFF position then turn Beer Flow Control Handle to CLEAN position. Wait five seconds then turn Beer Flow Control Handle to ON position. Probable Cause: Solution: Beer Flow Control Handle is OFF. Turn Beer Flow Control Handle to CLEAN position. Wait five seconds then turn Beer Flow Control Handle to ON

Perlick BeerTender

Scaricare : 3 File Size : 148 kb    Produttore : Perlick  
Categoria : Dispenser

Use of 8 oz glasses is recommended to maintain the ideal serving temperature. Draught and Drink * Be aware that the first glass you pour from every new DraughtKeg will contain mostly foam. This is typical of draught beer. Allow the foam to settle and continue to pour. * Tilt and pour: Tilt your glass at a 45 degree angle as you pour and adjust upright as the glass fills. * Ensure you pull the tap handle all the way down. Not opening the handle all the way will result in excessive foam. * For the

Perlick Keg Couplers Tapping Equipment

Scaricare : 3 File Size : 168 kb    Produttore : Perlick  
Categoria : Dispenser

It senses when a keg is empty and shuts off the beer flow, yet leaves the line fully charged with beer. This prevents gas from entering an empty line causing excessive foaming when tapping a fresh keg. Packed 25 per case. Weight: 1 lb. 8 oz. each Part No. Description 26000F*...............................For Domestic Kegs 27500F.................................For Imported Kegs *U.S. Patent #5,630, 441 Universal Empty Keg Sensor Controls the amount of beer loss by closing off the beer flow

Perlick DP1KP

Scaricare : 0 File Size : 301 kb    Produttore : Perlick  
Categoria : Dispenser

Screw connector to stainless steel beverage line on faucet standard. Tighten with a wrench, but do not over tighten. 2. Make sure lever handle on keg coupler is in the UP (untapped) position. Place one brown leather washer into wing nut end of black beer line connector hose and thread onto top of keg coupler. Hand tighten. 3. Place clamp on one end of red air line. Push end over air valve located inside cabinet. Tighten clamp with screwdriver. Turn shut-off valve to OFF (horizontal) position. 4.

Perlick DS1KP

Scaricare : 0 File Size : 301 kb    Produttore : Perlick  
Categoria : Dispenser

Adjusting CO2 Gas Flow 1. Turn regulator adjusting screw counterclockwise until it turns freely. 2. Turn hand valve counterclockwise on CO2 cylinder to the fully open position. 3. Turn regulator adjusting screw clockwise until desired pressure is reached (approx. 12-15 lbs.). Tighten stop nut on adjusting screw. 4. Open shut-off valve on bottom of regulator. CO2 Leak Test Shut Off Valve (Black Lever in Closed Position) Cover for Adjusting Broach Regulator Fitting Fitting for Red Air Hose Dilute

Perlick DS Series

Scaricare : 11 File Size : 331 kb    Produttore : Perlick  
Categoria : Dispenser

Electrical The cabinet must be connected to a separately fused power source (see electrical specification plate) and grounded in accordance with National and Local Electrical Codes. Caution: Do not attempt to operate the equipment on any other power source than that listed on the Electrical Specification plate. IMPORTANT WARNING To avoid compressor damage. DO NOT RUN UNIT IF CABINET HAS BEEN LAID ON ITS BACK If cabinet has been laid on its back for any reason, place it back into the upright posi

Perlick BC36 Series

Scaricare : 8 File Size : 337 kb    Produttore : Perlick  
Categoria : Dispenser

INSTALLATION AND OPERATION INSTRUCTIONS FLAT TOP BOTTLE COOLER Table of Contents Cabinet Specifications ..........................................2 Installing Uncrating and Inspection ................................3 Plumbing .........................................................3 Electrical..........................................................3 Adjusting Partitions .........................................3 Installing Casters and Legs.............................3 Placing the Cabinet...





categorie