Proc Amp The proc amp allows for adjustments to the Brightness, Contrast, Saturation and Hue levels of the video image. These parameters can be set as follows: Parameters Range Brightness -10% to 10%, in 0.5% increments Contrast -6dB to 6dB, in 0.5dB increments Saturation -6dB to 6dB, in 0.5dB increments Hue -20. to 20., in 1. increments Legalizer The FRS-1002-MD-LG-PA ensures video signals conform to industry-defined «legal» limited ranges. The legalizer allows users to adjust the clipping for

4 The Algogear Series ............................... 5 Contact us ..................................29 Installation and setup .....................6 Static Discharge ..................................... 6 Board Installation ................................... 6 Installation and setup .....................7 Power Consumption ............................... 8 Front Module .......................................... 8 Rear Input / Output Module Labels .......... 9 Output Channels .................

Once you have configured the card to your liking in the Video Setup and Audio Setup tabs of the Dashboard interface, select a name under which the configuration will be saved, beside the Save Settings Destination function, and hit the Save button. A dialog box will open and ask you to confirm your decision Parameters can be saved as: • All (applies the settings to User 1, 2, 3 and 4) • User 1 • User 2 • User 3 • User 4 Settings can be saved by channel (1 or 2), or for both channels together (All

3 Introduction ..................................4 Compression Artifacts .............................. 4 Flea........................................................ 4 Getting Started .............................5 Accessories .........................................5 Connecting your Flea ...........................5 Typical Set-up .......................................... 5 Power Connections .................................. 6 Video Connections ................................... 7 USB Port

(Some EU member states may have different deadlines.) Equipment that complies with the EU directive will be marked with a WEEE-compliant emblem, as shown in the figure below. Please insure that this equipment is properly recycled at its end-of-life. Algolith invites you to contact your local or regional waste administration if you need any information on how to dispose of this equipment in an environmentally friendly and health conscious manner. 3 XVC-1001-DC Guide to installation and operation