Precautions 1. Précautions • Never fail to wear a long-sleeved shirt, long-legged trousers, gloves, safety shoes, goggles, and ear protectors. • Do not operate when you cannot make a normal judgement e.g. when introxicated or overworked etc. • Keep fire away from the unit in operation. • Start the engine in a well-ventilated place. • Check if the mounting screw of the cutter blade is loose. • Check if there are any fissure, crack or bend on the cutter blade. • Use genuine parts for repla

Tokyo, Japan declare In sole responsibility that the following products referred to In this declaration conform with _DIRECTIVE BBQ36/EEC, BB/392/EEC & A1/36B/EEC._ BC3302DL-M-1 BC435DWH-1 BK436FL BC2601DLM-1 BC534DLM-1 BK531DL BC2BD1DWM-1 BC534DWM-1 BC342DLU-1 BC342DWM-1 SERIAL NUMBERS : 700101 and up Tho company named above will keep on file the following technical documentation for any Inspection purpose. * Operation Instructions • Plans and Drawings ■ Description of measures designed

[It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of seven (7) years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.] APPLICABLE SERIAL NUMBERS : Mar. 2006 G3200 : 600001 and up G3200EZ : 632994 and up .27 . G3200 14. Parts list Fig.1 POWER UNIT (S/N 600001 and up) G3200 Fig.1 POWER UNIT (S/N 600001 and up) Key# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1

And it is also possible that some parts may be available even after the limit of ten (10) years.] BC430WE BC430WE Fig.1 CUTTER GROUP BC430WE Fig.1 CUTTER GROUP Q'TY Key# PART NUMBER DESCRIPTION NOTE /UNIT 1 3540-11102 HOUSING COMP 1 2 3540-11112 • HOUSING 1 3 3144-11150 • SEAL 1 4 00263-20610 • SCREW 1 5 3540-11311 DRUM 1 6 06004-06202 BEARING 1 7 04065-03515 RING 1 8 04064-01510 RING 1 9 3540-11410 SPACER 1 10 6340-12101 PIPE COMP 1 11 3260-11410 • RING 1 12 6340-12210 SHAFT 1 13 5766-13000 GEA

Please read it carefully before starting operation. Should you have any question about this manual, please contact your dealer. Due to the modification of the specifications or others, the contents of this manual are subject to change without notice. Contents Table des matières 1. Precautions........... 3 1. Précautions........... 3 2. Name of Major Parts...... 5 2. Désignation des pièces 3. Assembly principales............ 6 1 ) Engine............ 7 3. Montage 2) Handle...........

Agregue grasa nueva cada 25 horas de uso o con mayor frecuencia dependiendo de las condiciones de trabajo. • Desmonte los soportes del cortador antes de agregar grasa nueva para permitir que la grasa usada pueda salir. ¦ TOMA DE AIRE DE REFRIGERACION ADVERTENCIA • Nunca toque el cilindro, el silenciador o las bujias con las manos descubiertas inmediatamente despues de parar el motor. El motor puede alcanzar altas temperaturas mientras funciona, por lo que tal accion podria causarle graves quemad

G B Check for cracks and for excessive wear interfering with the chain drive. If the wear is considerable, replace it with new one. Never fit a new chain on a worn sprocket, or a worn chain on a new sprocket. 8. Maintenance of Saw Chain and Guide Bar ¦ Saw Chain Place the file on the cutter and push straight forward. Keep the file position as illustrated. It is very important for smooth and safe operation to always keep the cutters sharp. The cutters need to be sharpened when: • Sawdust becomes

4 Specifications ................................................. 4 Warning labels on the machine...................... 5 Symbols on the machine ................................ 5 For safe operation........................................... 6 Set up............................................................. 9 Fuel............................................................... 10 Operation...................................................... 11 Maintenance............................

(1) (2) (3) (1) muffler guard (2) guide bar (3) saw chain G2500 / G2500 OPS WORKING WITH TREE SERVICE CHAIN-SAWS FROM A ROPE AND HARNESS This chapter sets out working practices to reduce the risk of injury from tree service chainsaws when working at height from a rope and harness. While it may form the basis of guidance and training literature, it should not be regarded as a substitute for formal training. General requirements working at height Operators of tree service chainsaws working at heig