See pages 7-10 for more details. 2 FEATURES HDMI 1.3 Features • 225 MHz (up to 12 bit YUV 444 @ 1080p) • Deep Color • Dolby TrueHD and DTS-HD Master Audio • Lip-Sync Features • Simultaneously displays a single Hi Def source on up to four (4) HDTV displays without signal loss. • Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p and 1920x1200@60 Hz. • 3DTV Pass-Through • Fast Switching Technology for quick and responsive HDMI signal routing. • Auto-EDID Management for
7 5V DC Locking Power Connector Connect the included 5V DC Locking Power Supply to this receptacle. 5 RECEIVER UNIT LAYOUT Front 1 4 2 3 5 Back 76 8 6 RECEIVER UNIT DESCRIPTIONS 1 RS-232 Output Port Connect a controlling device to this port. 2 Locking HDMI Output Port Connect a HDTV display to this HDMI port 3 IR Window Receives signals from the Hi-Def source IR remote control unit. The IR signals are sent back to the source device, when using an IR Blaster. 4 Calibration Indicator This LED will
6 DVI-I Output This DVI-I output port will support an analog or digital output display device. A DVI to VGA adapter will be required when using a VGA capable display with this output port. 7 DVI/RS-232 and VGA/Audio RJ-45 Ports These RJ-45 ports connect the CAT5•4000 receiver to the CAT5•4000 sender unit using CAT-5, CAT-5e or CAT-6 cabling. When using an analog or digital video source on the channel 1 input, connect the CAT-5 cables according to the labels on both the sender and receiver units.
Home Theater Scaler Pro is a trademark of Gefen LLC All trademarks are the property of their respective companies. © 2011 Gefen, LLC. All rights reserved. All trademarks are the property of their respective companies. Rev X2 CONTENTS CONTENTSCONTENTSCONTENTSCONTENTSCONTENTS Introduction Operation Notes Features Panel Layout Panel Descriptions Connecting And Operating The Home Theater Scaler Pro Specifications Warranty INTRODUCTION Congratulations on your purchase of the Home Theater Scaler Pro.
2 Internal EDID LED This LED will activate only when the pre-programmed internal EDID is being used. Please see page 6 for more details on the internal EDID. 3 External EDID LED (default EDID routing) This LED will activate only when the external EDID is being used. Please see page 6 for more details on the external EDID. 4 Link LED This LED will activate when a valid link between the source and the splitter is detected. 5 EDID Button This button will activate the onboard EDID. Press this button
The PIN code screen provides a secure gateway to the Main Menu. The PIN code screen can be displayed at any time by pressing the Home button on the IR Remote Control. 1. Press the Home button on the IR Remote Control. 2. The Input PIN code screen will be displayed. 3. Use the numeric keypad on the included IR Remote Control to enter the PIN code. The default PIN code is: 0000. Numeric Keypad Use the numeric keypad on the IR Remote Control to enter the PIN code. The Main Menu will automatically b
Write To: Gefen LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen LLC reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. GefenTV HDMI to HDMI Plus Audio Converter is a trademark of Gefen, LLC HDMI, the logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries. © 2011 Gefen, LLC, All
Your complete satisfaction is very important to us. GefenTV GefenTV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you find your solutions.. Don’t see what you are looking for here? Please call us so we can better assi
c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Extender for HDMI 1.3 Over CAT-6 is a trademark of Gefen Inc. © 2008 Gefen Inc., All Rights Reserved All trademarks are the property of their respective companies Rev X1 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel
FAST MODE: Setting the Splitter to FAST mode will improve performance when connecting / disconnecting Hi-Def sources, and powering ON / OFF HDTV displays. NOTE: When switching from SLOW mode to FAST mode, the HDTV displays connected to the Splitter will blink momentarily. SLOW MODE: When set to SLOW mode, the Splitter will follow the standard authentication process, based on the HDMI and HDCP specifications. SLOW mode is recommended when the source does not support multiple devices. 12 WALL MOUN