Do not carry out repairs yourself, as this will void the guarantee covered by the supplier. Never submerge or wet the dryer. 4. WARNING: When the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off. 1 SWITCH (B) 2 SWITCH (A) 3 COOL SHOT 4 CONCENTRATOR 5 BACK COVER 6 HANGING LOOP SWITCH (A) SWITCH (B) 0 1 --I 1 2 --II 2 3 --III A0 =OFF SWITCH ( C ) (COOL SHOT) A1+B+C =GENTLE AIR A2 + B+C =STRON

Practical tips - Keep the sole plate smooth, do not apply it to metallic objects (i.e., to the ironing-board, buttons, zips...). - Fit the iron in its housing (L) for transport and storage, in order to improve its stability. - To avoid burns, do not lean Bravissimo 2 Pro’s iron on its back MW_EX23805 SteamStation_IM.indd3 33 MW_EX23805 SteamStation_IM.indd 7/25/20077/25/2007 2:02:50 PM 2:02:50 PM Steam ironing When you start to iron, proceed as follows: - Unscrew the cap (F) and fill the boiler

Please read this instruction manual carefully and familiarize yourself with your new steam iron. Before using the first time, please retain this manual for future reference. A C D E F G H I J K B A. Spray Nozzle B. Water filling inlet C. Steam control turning knob D. Burst of steam button E. Spray Button F. Soft touch grip G. Temperature control dial H. Power cord protector I. Water tank J. Ceramic soleplate K. Self-cleaning button MW_WX23600_PROGLIDE_IRON_IM.indd2 22 MW_WX23600_PROGLIDE_IRON_IM

Failure to follow and observe these instructions may result in an accident. Use or working environment: - CAUTION: In order to prevent overheating, do not cover the appliance. Electrical safety - Do not use the appliance if the cable or plug is damaged. - Ensure that the voltage indicated on the nameplate matches the mains voltage before plugging in the appliance. - The appliance’s plug must fit into the mains socket properly. Do not alter the plug. Do not use plug adaptors. - Do not use or stor

Its technology, design and operation and the fact that it exceeds the strictest quality standards, ensures it will give you full satisfaction for a very long time. Description A Spray button A B C D H I F E G Fig. 1 B Steam blast button C Steam setting control D Self-cleaning button E Spray nozzle F Filling hole G Base H Temperature gauge I Iron ready pilot light 23460_IM.indd2 22 23460_IM.indd 5/19/20105/19/2010 12:56:56 PM 12:56:56 PM Safety advice and warnings in the appliance. - Connect the

If the milk is at room temperature or a little warmer it assists with frothing, Very cold milk can be warmed in a microwave oven or in a saucepan on the cooktop. (do no over heat) 3. Hold the frother stem in the milk to be frothed and switch on. Be sure the container of milk is only 1/3 filled, to allow room for the frothing process. Rotate and move the frother in and out of the milk. Your milk will be light and frothy in seconds, perfect for cappuccino or children drinks. 4.To clean simply im

Heat-insulated plate 3. Spray nozzle 4. Water tank 5. Spray button 6. Steam button 7. Pilot light 8. Temperature control knob 9. Handle 10. Front cover 11. Back cover 12. Power supply cord IMPORTANT SAFEGUARDS 1. Please read all instructions carefully before using the appliance for the first time. 2. Before connecting the appliance, check if the voltage indicated on the rating label corresponds with the mains voltage in your home. 3. Do not use appliance for anything other than its intended use.

- Before using the product for the fi rst time, clean all the parts that are in contact with food, as indicated in the cleaning section. Use or working environment: - Keep the working area clean and well lit. Cluttered and dark areas invite accidents. Electrical safety: - Do not use the appliance if the cable or plug is damaged. - Ensure that the voltage indicated on the nameplate matches the mains voltage before plugging in the appliance. - The appliance’s plug must fit into the mains socket pr

Thanks to its technology, design and operation and the fact that it goes through strict quality controls - we feel sure you will be entirely satisfied. A Heat-insulating tip B On pilot light C Start/stop switch D 360° rotating cable E Temperature control F Ceramic plates WB20310_HAIRSTRAIGHTENER_M.indd 2 6/3/2010 11:51:25 AM ■■ # Safety advice and cautions -Read these instructions carefully before switching on the appliance and keep them for future consultation. -This appliance is o

2. Fill the water deposit through the filling hole (Fig. 1). 3. If your tap water is hard, use distilled water only. 4. Do not use chemically decalcified water. 5. The harder the water the more frequently the iron should be cleaned. 6. Throw out any excess water after use, once the iron has been unplugged. Steam Ironing 1. Fill up the iron as described in the section “How to fill the water deposit”. 2. Plug in the iron. 3. Steam ironing is only possible if you select the highest temperature***.