1.0 Step 2 Pull out the front panel. Rü1fei Quick Installation Guide Office NAS 3.5” IDE/SATA Network Attached Storage Model # ANAS350 Package Contents: Office NAS Vertical Stand Power adapter Ethernet Cable Utility CD Quick Installation Guide Screws (4) Rubber feet (4) Section 1 Hard Drive Installation WARNING: This Network Attached Storage device is not hot-swappable. Please make sure that it is turned off and not connected to the power outlet when performing the following assembl

7 4. Configuring the Router Step 1 Open the web browser and type 192.168.1.1 in the URL Address field and press Enter. Step 2 Enter admin for both the username and password fields and click OK. 8 Cable Modem For most cable modem users, you should be able to connect to the Internet without any configuration. If your ISP has provided you with a host name, enter it in the optional Host Name field. Click Apply to save the setting. If your ISP requires a registered MAC Address, click on the MAC Addre

1A Table of Contents 1. Overview .....................................................................................................................4 1.1 Product Features ................................................................................................... 4 1.2 System Requirements ........................................................................................... 4 1.3 Applications ..........................................................................................

27 Step 3 To print, open a document and select File > Print from the menu. Step 4 Select Edit Printer List from the Printer dialog box. Step 5 Click Add Printer and then select the desired printing protocol (AppleTalk or LPR Printers using IP). 28 AppleTalk: After selecting AppleTalk, the Port Name of the Print Server will be displayed. Select the Port to which the PostScript printer is connected. Then, select the printer model from the dialog box. Click Add Printer to complete the Printer Port

Installation 2.1 Install Driver & Utility This section provides instructions on how to install the 300N Draft 802.11n Wireless PCI Adapter. The driver is installed along with the utility. Note: Be sure to power off your computer before inserting the Cardbus adapter. Step 1 Insert the PCI adapter into an available PCI slot and turn on your computer. Step 2 After turning on the computer, Windows will launch the Found New Hardware Wizard. The Found New Hardware Wizard appears differently depending

1A Table of Contents 1. Introduction .................................................................................................................3 1.1 Package Contents ................................................................................................. 3 2. Installation ................................................................................................................... 4 2.1 Install Driver & Utility.................................................................

Connecting any other USB device to the Printer Server may damage the Printer Server. Note: Before connecting the Printer Server, you must install the printer driver on each computer you plan to use with the printer. Make sure that you are able to print, scan, and fax from each with your multi-functional printer directly connected to your computer(s). Step 1 Power down the printer and the printer server. Step 2 Connect one end of a networking cable to your router, then connect the other end to th

1B Section 1 Section 1 This Quick Installation Guide only provides the basic instructions. For moredetailed information, please refer to the User’s Manual in the supplied CD. Getting Started Please refer to the following diagrams to determine which operating modeyou should use for your network. If you want to use the AP421W as an Access Point with minimal configuration, just connect it to yourexisting router or switch with a Cat. 5 network cable and then power it on. The Access Point is ready to

To modify an existing profile, select that profile from the My Wireless Networks box and click on modify. To create a new profile, click on New. 20 The Profile Settings box will appear allowing you to specify the settings for your new profile or change settings for your existing profile. Once you are finished entering the settings, click OK to save the changes. 21 4.4 Configuring Encryption This section describes the different types of encryption available and how to configure them. In most case

This is the recommended option. InstallShield- [ < Back || Next > j | Cancel ] Step 7 Click Yes to acknowledge the need fora reboot after the installation. Step 8 Click Next to accept the default Destination Folder. Atheros Client Installation Program Choose Destination Location Select the folder where the installation program will install the files. The installation program will install the client utilities in the following location: Destination Folder C:\Program Files'Airlinkl 01 \A