Multi-Mode Objects Multi-mode objects offer high- performance programming! The single most-advanced VT Pro-e high-performance programming technique involving the TPS-12B/W, TPS-15B/W & TPS-17B/W is the concept of multi-mode objects. A multi-mode object (i.e. button, legend, etc.) is an object drawn on a VT Pro-e page that can have one or more active and inactive visible settings (modes). For examples, refer to and search for multi-mode object examples. This file contains the VT Pro-e touchpanel

loading projects and firmware) • Touch Output (communication of touch coordinates to an external device) • Mouse Input (allows a mouse to control the touchpanel) • External Touch Input (allows another device to control the touchpanel) For convenience the RS-232 MENU also permits the selection of the RS-232 communication options Baud Rate, Data Bits, Stop Bits, Parity, RTS On/Off and XON-XOFF On/Off. Touch the communication option to select communication parameters and then touch Save and Return

A single model supports both 120 and 220-240 Volt electronic and magnetic low-voltage, incandescent, neon/cold cathode, two wire dimmable fluorescent and non-dimmable lighting loads up to 5 Amps per channel, 10 Amps total. Features and Functions • Four channels of forward or reverse phase dimming • Auto load detection • 120-240 Volt 50/60 Hz operation • Selectable non-dim mode • “Wilson” filter eliminates lamp flicker • Short circuit and overload protection • Master air gap relay • Override inpu

15 Volvo Drive Rockleigh, NJ 07647 800.237.2041 For Commercial Lighting Solutions, refer to Doc. 4775 All brand names, product names, and trademarks are the sole property of their respective owners. Crestron Residential Lighting Design Guide Contents INTRODUCTION .................................................... 1 THE SINGLE SOLUTION CONTROL SYSTEM – A CRESTRON EXCLUSIVE ............................................................ 1 CRESTRON CONTROL TECHNOLOGY ............................ 2 C

Press VIEW to select preferences. Press the Arrow keys (^Ў) to select the value of the parameter. MODEVIEW.... CRESTRONSETUP: SYSTEM PERFHeat Anticipator: Cool Anticipator: Auto Mode DdBand: HP Balance Pt: AUX Balance Pt: 332000150Anticipators(valid selections are 1 through 6) Low number = more frequent cycles and fasterresponse (tighter regulation) High number = less frequent cycles and slowerresponse (looser regulation) Auto Mode Dead Band(valid selections are 2 through 60) The minimum differe

©2007 Crestron Electronics, Inc. Contents Isys® G-Series Touchpanel Interface: TPS-GA-TPI 1 Introduction...............................................................................................................................1 Features and Functions................................................................................................1 Internal Block Diagram...............................................................................................3 Specifications..............

A reduction in image size will save a considerable amount of memory space for your project. In VT Pro-e, the Compress checkbox permits the image to be compressed when compiling. The 16 Bits checkbox converts a 24-bit or 32-bit image to 16 bits. This conversion to a 16-bit image may cause the loss of some subtle shading. To compensate for this, use the dithering to simulate the original shading. Various dithering types are available. Refer to the following illustrations. VT Pro-e “Page Properties

By any standard, Isys technology is state-of-the-art, but its extraordinary beauty is the first thing you notice. Sleek curves reveal a striking ergonomic design. And the 15" diagonal touch-sensitive LCD display features bright, crisp XGA resolution and true-to-life color.With both graphics and video, full screen or in multiple windows, it produces a gorgeous,high resolution picture. The beauty of Isys is more than skin deep. Isys also delivers breathtaking performance that rewrites all the rule

...............................................................................15 How the Program Works...........................................................................................15 How to Create the Program .......................................................................................16 Reserved Join Numbers.............................................................................................19 Problem Solving ......................................................

The Exit and Run Program button verifies that all of the setup information has been saved to the EEPROM and displays the main page that has been programmed into your system. The remaining buttons on the MAIN MENU open other menus which are discussed in subsequent paragraphs. MAIN MENU Calibration Menu CALIBRATION MENU Touch Perform Calibration. The message “Touch Upper Left” appears centered on the panel with a cross hair in the upper left corner. Touch the center of the cross hair in the corner