= If chemical products or mixtures of product come into contact with the eyes or are swallowed consult a doctor immediately, taking the label of the product with you. = Wash all clothes that come into contact with the chemical, whether diluted or undiluted, thoroughly before using them again. = Don’t smoke, drink or eat when preparing or spraying the mix or near or in the fields treated. = DON’T ENTER THE TANK: the residues of a chemical product can cause poisoning and suffocation. = When sprayi

: Depending on the season the vegetation may be more or less luxuriant; bear this in mind before starting the treatment. If the plants don’t have much foliage you should diminish the quantity of litres per hectare using lower pressures or closing one or more jets of the fan. 6.4 CALIBRATING CANNON ATOMISERS ( Tables on pages 31-33 ) Atomisers with a cannon blower group are mainly intended for treating forest trees or other tall plants that it is impossible to drive into with the sprayer (for exa

5.7.2 HYDRAULIC DRIVEN HEADS On request hydraulic pivoting (inclination 90° roughly) and rotating (max rotation 270°) heads are available. 5.7.3 HYDRAULIC DRIVES The cannon fans can be equipped with hydraulic drives: with the cylinder fitted directly (30° inclination roughly) or a motor with a pinion and chain (180° inclination roughly). 5.7.4 OIL FEED FROMTRACTOR (for hydraulic systems) Connect the delivery and discharge quick-fit coupling to the respective connections, respecting the direction

= connect hose T to deviator D using the union hose adaptor supplied. = turn the lever of deviator D to the filling position. = place the other end of the hose, on which you fitted filter G, in the watering point. = start the power-takeoff leaving pressure regulator C in the draining position (you don’t have to put the pump under pressure). = the filling speed in litres/minute is equal to the delivery of pump P. = visually check the level of the liquid in the tank and after filling stop the pump

4 1.1 COMPOSITION OF THE MANUAL ...................................................................................... 4 1.2 GUARANTEE ....................................................................................................................... 4 1.3 PRODUCT RESPONSIBILITY ............................................................................................. 4 1.4 WARNING SIGNS IN THE MANUAL AND ON THE MACHINE............................................4 2 SAFETY REGULATIONS AND

Nevertheless, we list summarily a number of instructions to observe: Petrol mixture motors (two stroke): respect the percentage of oil present in the petrol and avoid the motor losing revs if the liquid contained in the cistern unexpectedly finishes. Petrol and diesel motors with electric starters: check the level of efficiency of the battery and carry out normal maintenance. Before starting check that the command lever of the pressure adjustor (lever A page 10) is in the discharge position; sta

It is used as follows: - turn pressure on in TOP-MIX premixer (see paragraph above) -turn lever 6 down and suck the product up. -the product is suctioned, mixed with water under pressure, and directly incorporated in the tank of the machine. -after incorporating the product in the tank, lift lever 6 back to a horizontal position. NOTE:To wash the incorporator, put it in the premixer for a few seconds, performing the hopper washing operations described in paragraph 4.4. 18 unigreen 4.13 WASHING T

8.2.3 MULTIPLIER LUBRICATION The multiplier and disengaging boxes are normally lubricated in an “oil bath”, in special cases NLGI n.0 grease is used. The viscosity is an essential characteristic of a lubricant oil and this is indicated by the SAE (SOCIETY OF AUTO-MOTIVE ENGINEERS) classification of the oils for gearboxes and differentials. Special additives improve the capacity of the oil to maintain a lubricant film also at high pressures and temperatures. We recommended using SAE 90 oil for th

Never lift or move the mistblowers by hand if there is liquid in the tank. The machine will weigh more and the movement of the liquid can change the centre of gravity causing uncontrolled movements. We recommend using slings as shown in the figure, the lifting points to use on the machine are indicated with the relevant symbol. Movimentare e sollevare la macchina Don’t lift the machine with the forks of a forklift truck because the machine can solo con cisterna vuota tip over due to the overhang

15,0 17,2 19,6 21,8 23,7 27,0 29,6 20,2 24,8 28,4 31,6 34,8 40,0 44,0ug. sing. 1,88 2,15 2,45 2,72 2,96 3,37 3,70 2,53 3,10 3,55 3,95 4,35 5,00 5,50 Velocita Km/hspeed Litri/haLitri/haLitri/ha Velocita Km/hspeed Velocita Km/hspeed Larghezza di lavoro working width 3 m. 4 m. 5 m. Tab. 3215/0000F N.B. to calculate the different ranges it is sufficient to multiply the value lt/hectare by the corresponding width indicated in the table and divide it by the new width (see chapter 6.3, page 20). unigre