Wait until the indicator light comes on before laminating, 2. Repeat step 1 until the laminator produces the desired results. To decrease the temperature: 1. Turn the temperature control knob counter-clockwise to reduce the temperature. Tlie green indicator light will remain on. Wait several minutes before laminating. 2, Repeat step I until the laminator produces the desired re suits. If the pouch does not seal or the lamination is cloudy, the temperature is too low. If the lamination conta

With the purchase of this quality product you can be sure you have made a good choice. Please read these operating instructions before putting the machine into operation and observe the safety regulations. Cher client, Nous vous remercions d’avoir choisi un destructeur de documents IDEAL. Nous vous felicitons pour le choix de ce produit de qualite. Nous vous prions de lire attentivement le mode d’emploi avant d’utiliser la machine, et attirons votre attention sur les consignes de securite. Geach

ON/OFF Switch set to Move Switch to “I” (on) If you have any questions regarding your new DAHLE paper shredder, call your wrong position position sales representative. 2. Unit unplugged Connect to outlet 3. Outlet dead Reset circuit breaker 4. Door not fully closed Close Door 5. Waste Bin full Empty Waste Bin Check off the model and record the serial number for your records in the space Low capacity 1. Cutting blades dry Lubricate cutting blades provided below. according to instructions. . 20606

A mild general household cleaner is recommended. LUBRICATION The blades of your Dahle cutter were lubricated at the factory and do not require any additional treatment. Do Not lubricate the cutting blades. CAUTION • Keep fingers clear of cutting blades. • Do not lubricate the cutting blades. • Keep out of reach of children. • Keep handle in down position when not in use and when moving or transporting. a bcoffice (800) 658-8788 12112.90.1830 - 7/00

Remove the bound number of sheets, and place it onto the the open closing bars. Then pull book. machine. Remove the punched paper from the closing lever to close the the punch and place it directly into the wire. open wire comb. The horizontal closing mechanism prevents the pages from slipping out of the comb while closing. (text) abcoffice 800-658-8788 Gestaltung Kunz Produkt und Grafik, Schwabisch Gmund, Telefon 07175 99 9120Plister WirePack Order Nr. 49 472 0380 SPECIFICATIONS – AT A GLANCE R

(45 kg). The surface should be at least 30 inches high to assure comfortable positioning during operation. All four rubber support feet should be positioned completely on the supporting surface. The supporting surface may also be large enough to hold the material to be laminated. 3. The laminator should be positioned to allow exiting film to drop freely to the floor. Accumulation of laminate immediately behind the laminator as it exits the equipment may cause the film to wrap around the pull ro

Keep hands, hair, and clothing away from moving parts during maintenance and/or operation. JOG 400 Setup, Operation and Maintenance Setup Carefully remove the model 400 paper jogger from it's shipping container. Place the jogger on a solid, level surface. Then plug it in to any standard 115 V 60Hz recepticle. Operation Turn the power switch to the 'on' position. It should light up and the paper cradle should begin vibrating. Insert your papers. When you are finished, return the switch to

This laminator is designed to provide quality Lamination of all thicknesses of plastic. The Model PL4A wil] easily laminate items up to ¥/*' wide such as ID cards, badges, membership cards, photographs, and luggage tags. The PL12A is designed for cards as well as larger items up to 12” wide, A thermostat allows you to adjust the temperature for laminating various materials. OPERATION Before using your laminator» be sure to observe the following precautions: * To prevent electric shock, do no

4 1.1 Safety Instructions ....................................... 4 1.2 Application ................................................... 4 2. Installation ................................................... 5 2.1 Pre-assembly .............................................. 5 2.2 Power supply............................................... 6 2.3 Checking rotating direction .......................... 6 3. Operation .................................................... 7 3.1 Operating elements IDEAL 41

The power supply voltage and frequency must be as specified on the nameplate. Place paper, envelopes or checks in the jogger bin(s) and press the orange power button. The vibratory amplitude ofthe unit is changed by turning the rheostat dial located on the control panel. For best results documents should be jogged for at least 15to30 seconds. For maximum efficiency, Formax recommends a maximum load of10 pounds for the Models FD 400P1, FD 400P2, FD 400E2 & a maximum of 50 pounds for the Model F