To turn OFF the COLD timer, press the “AUTO TIMER” clock button(s) until the light(s) on the clock button(s) turns off. Operate in Automatic Mode (with COLD Timer Activated) 1. Turn power switch ON and wait for LED display to light up. 2. Press the left hand “Auger ON/OFF” button ON. 3. To operate in COLD mode press the “AUTO TIMER” button until it is illuminated. 4. When setting automatic times, please keep in mind it will take time for the frozen product to become liquid or vice versa. Operate

© 2004, IMI Cornelius Inc. - 1 -Publication Number: TP00968 Quest Juice Training Manual DIMENSIONS & CAPACITIES Quest Dispense Rate ........................................1.0 – 2.2 oz./sec. Electrical rating .......................................115 VAC, 60 Hz, 15 amp dedicated circuit ................................................................220 VAC, 50Hz Dimensions .............................................29.3” H, 24.3” D Condenser clearance..............................4” back, 12

Applicable Ice Maker Models ICEMAKER MODELS SIZE (WIDTH) Cornelius 322/522 (includes AC/WC 322) 22” Crystal Tips 200/300/400 22” Ice-O-Matic GC 300/550 22” Manitowoc 320/420 22” Scotsman SLC 300/400 22” Servend S2/4 22” Table 2. Loose Shipped Parts Item No. Part No. Name Qty. 1 52994 Cover, Gray - 08008 1 52934 Cover, Black - 02390 1 2 15506 Lid Assembly 1 3 29565 Bracket 2 4 70217 #8 Screw 6 5 50904 RTV 1 6 90221 Label 1 7 92111 Installation Instruction 1 8 620701902 Acorn Nu

It is assumed that appropriate safety precautions are taken and that all local safety and construction requirements are being met, in addition to the information contained in this manual. This Product is warranted only as provided in Cornelius’ Commercial Warrant applicable to this Product and is subject to all of the restrictions and limitations contained in the Commercial Warranty. Cornelius will not be responsible for any repair, replacement or other service required by or loss or damage resu

Contact Information: To inquire about current revisions of this and other documentation or for assistance with any Cornelius product contact: Trademarks and Copyrights: This document contains proprietary information and it may not be reproduced in any way without permission from Cornelius. Printed in U.S.A. SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS Safety Overview Recognition DIFFERENT TYPES OF ALERTS SAFETY TIPS QUALIFIED SERVICE PERSONNEL SAFETY PRECAUTIONS This unit has been

1 620313223 CO2 Pressure Switch 1 2 77060500 Tee 1/4MFL 1 3 40502 O-Clamp 2 4 77010400 1/4 Barb Stem 2 5 77045700 1/4 Flare Swivel Nut 2 6 178025100 1/4 Flare Washer 3 7 33666 Indicator Light 24V 1 8 620316401 CO2 Light Harness 1 9 620316402 CO2 Pressure Switch Harness 1 10 620313651 Jumper CO2 Pressure Switch 1 11 32870 Splice 2 12 50705 Cable Tie 8 13 620920638 Label Low CO2 Light 1 14 620919569 Installation Instructions 1 ! WARNING: Disconnect power to the unit before servicing. Follow all lo

WIRING DIAGRAM 2

DISPENSER HOOD 6. Install KEY-LOCK SWITCH (item 5) in the hood as shown in Figure 1 and secure with HEX NUT (item 4). 7. Refering to Wiring Diagram (Figure 2) disconnect black electrical wire, with push-on terminal on it’s end, from terminal on the transformer outlet. 8. Connect black electrical wire, disconnected from the transformer outlet terminal, to mating electrical wire terminal on the WIRING HARNESS (item 1). 9. Connect other electrical wire of the wiring harness to output terminal o