10. Apagar el motor y conectar externa al diafragma de vacio la computadora a bordo del vehiculo. 11. Poner el control de avance de la luz en “0”. Volver a arrancar el motor. 12. Apuntar la luz de regulacion a las marcas de regulacion, pulsar el gatillo y observar la regulacion del motor. 13. Ajustar la velocidad (rpm) del motor si es necesario, y aplicar los niveles de vacio al diafragma de vacio del avance, como se indica en el manual de servicio del vehiculo. (Si es necesario reajustar las rp
The information, specifications and illustrations in this guide are based on the latest information available at the time of printing. SPX Corporation reserves the right to make changes at any time without notice. If you have questions or concerns Contact Technical Support: •Phone: 1-800-228-7667 •Website: •Mail:SPX Service Solutions • 15825 Industrial Parkway • Cleveland, Ohio 44135 • Attn: Technical Support Scan Tool Information Complete the following list using the function “Tool Information”
Provide this information when contacting customer support. Serial No: SW ID: HW Ver: Boot Ver: Prod ID: Board ID: Burn Date: Burn Loc: If you have questions or concerns Contact Technical Support: •Phone: 1-800-228-7667 •Website: •Mail:SPX Service Solutions • 15825 Industrial Parkway • Cleveland, Ohio 44135 • Attn: Technical Support Copyright Information Copyright © 2006-2007 SPX Corporation All rights reserved. The information, specifications and illustrations in this guide are based on the late
This should be located under the Other Devices icon or the Universal Serial Bus controllers icon. Then, click Reinstall Driver or Update Driver. **There is usually a yellow question mark or exclamation mark next to the icon and it is usually located under the “Other Devices” folder. If you have trouble locating the icon, reinsure that your tool is plugged in and powered on. 2 CP9180 - USB Driver Installation Instructions 5. Highlight the bullet next to Yes, this time only and click Next > 6
Some 1994, 1995 and all 1996 and newer model Ford vehicles are OBD II-equipped. These vehicles require a Scan Tool or other OBD II-capable tester. Refer to the table below for compatibility information on your specific car, truck or van. Engine & Transmission Codes - 1981 through 1995 1981 2.3L: all Calif. - most elsewhere 4.2L: all 5.0L: all except Calif. and Lincoln Mark VI 5.8L: all except Calif. 1982 2.3L: all Calif. - most elsewhere 3.8L: Calif. only 4.2L: all 5.0L: all excep