Log:

Hans Grohe WILLIAMSBURG 2804

Scaricare : 0 File Size : 463 kb    Produttore : Hans Grohe  
Categoria : Plumbing

Insert FAUCET (1) and CABLE CONNECTOR (2) through mounting holes of Sink or mounting surface. Fig. A. Assemble LOCKNUTS (3) onto SHANKS (4) ( from under side of Sink. Hand tighten firmly. Fig. B. 2 2 1 4 3 3 4 (HAND TIGHTEN) M968422Rev.1.2 TM Fig. A. Fig. B. 1 Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. *Your new American Standard faucet is designed to work only with the Speed Connect drain. Heplful tips

Hans Grohe Widespread Lavatory Faucet 31730001

Scaricare : 1 File Size : 1 mb    Produttore : Hans Grohe  
Categoria : Plumbing

incoming hot water temp. 176°F* Recommended incoming hot water temp. 120° - 140°F* Max. flow rate -- lavatory faucets 2.2 gpm Max. flow rate -- bidet faucet 2.2 gpm The bidet faucet is not suitable for use on vertical spray bidets. This faucet may be used with a continuous flow water heater if the flow pressure is at least 20 PSI. For best results, Hansgrohe recommends that this faucet be installed by a licensed, professional plumber. *Please know and follow all applicable local codes when setti

Hans Grohe Widespread Lavatory Faucet 31263XX1

Scaricare : 0 File Size : 1 mb    Produttore : Hans Grohe  
Categoria : Plumbing

incoming water pressure 145 PSI Recommended incoming water pressure 22 - 72 PSI Max. incoming hot water temp. 176°F* Recommended incoming hot water temp. 120° - 140°F* Max. flow rate -- lavatory faucets 2.2 gpm Max. flow rate -- bidet faucet 2.2 gpm The bidet faucet is not suitable for use on vertical spray bidets. This faucet may be used with a continuous flow water heater if the flow pressure is at least 20 PSI. For best results, Hansgrohe recommends that this faucet be installed by a licensed

Hans Grohe Uno2 Sink Mixer 38830XX1

Scaricare : 5 File Size : 637 kb    Produttore : Hans Grohe  
Categoria : Plumbing

If Hansgrohe is unable to provide a replacement and repair is not practical or cannot be timely made, Hansgrohe may elect to refund the purchase price in exchange for the return of the product. LENGTH OF WARRANTY Replacement or repaired parts of products will be covered for the term of this warranty as stated in the following two sentences. If you are a consumer who purchased the product for use primarily for personal, family, or household purposes, this warranty extends for as long as you own t

Hans Grohe Uno Tumbler 41534XX1

Scaricare : 0 File Size : 47 kb    Produttore : Hans Grohe  
Categoria : Plumbing

Axor Uno Tumbler 41534XX1 Product Features • Solid brass holder • Frosted crystal tumbler • Wall-mounted Available Finishes Chrome Brushed Nickel The measurements shown are for reference only. Products and specifications shown are subject to change without notice. Specification sheet revised 4/2008 AXOR' 41534001 41534821

Hans Grohe Uno Bidet Mixer with Zero Handle 38200XX1

Scaricare : 1 File Size : 54 kb    Produttore : Hans Grohe  
Categoria : Plumbing

Hans Grohe Uno 38850XX1

Scaricare : 7 File Size : 118 kb    Produttore : Hans Grohe  
Categoria : Plumbing

Please know and follow all applicable local codes. Eco spray Normal spray Soft spray From the function is guaranteed. Installation Instructions Install the screen washer between the handshower and the hose. This will protect the handshower from debris in the water line. Depending on local water conditions, you may need to occasionally remove and clean the screen washer. UNDER NO CIRCUMSTANCES SHOULD THE SCREEN WASHER BE PERMANENTLY REMOVED. Using the Uno Handshower Change the spray modes by turn

Hans Grohe Uno 14856XX1

Scaricare : 2 File Size : 176 kb    Produttore : Hans Grohe  
Categoria : Plumbing

Hans Grohe Uno 14850XX1

Scaricare : 9 File Size : 176 kb    Produttore : Hans Grohe  
Categoria : Plumbing

Hans Grohe TROPIC CADET 2791

Scaricare : 0 File Size : 140 kb    Produttore : Hans Grohe  
Categoria : Plumbing

Secure with metal washer/nut combo. b. With tank parallel to wall, alternately tighten nuts until tank is snugged down evenly against bowl surface. CLOSET FLANGE CLOSET BOLT NUTWASHER BOLT CAP WASHER/ NUT COMBO ! ! CAUTION: DO NOT OVERTIGHTEN NUTS MORE THAN REQUIRED FOR A SNUG FIT! For Tanks/Bowls using Speed Connect System (Tank mounting bolts pre-installed). USE INCLUDED TOOL, NUT DRIVER, OR DEEP SOCKET RACHET.* 6 7 INSTALL TOILET a. Position toilet squarely to wall and, with a rocking motion,





categorie