Gallon/435 and 662 Litre Models Rheem-Ruud commercial storage tanks are vertical tanks designed for applications that require large quantities of hot water in short periods of time. When used in tandem with Rheem-Ruud commercial water heating equipment, these storage tanks provide the flexibility needed for many Commercial applications. Installed individually, or in parallel manifold, these storage tanks can provide 80% draw capability without an appreciable temperature decrease in single tempe

If installing three collectors, remove tiles for third collector strap. 4. Slide the Collector Extrusion on to the Collector Straps. After leveling, raise the hot pipe side of the extrusion by 1/2” per collector to ensure correct operation of the system (eg. For a 2 collector system, raise the hot pipe side of the extrusion by 1”). 6. Attach straps onto rafters or trusses with 5/16” x 6" lag screws. 7. Replace tiles that have previously been removed. 8. Flash and seal all roof penetrations. 9. C

This manual also includes a parts list. It is very important that all persons who are expected to install, operate or adjust this water heater read the instructions carefully so they may understand how to perform these operations. If you do not understand these instructions or any terms within it, seek professional advice. Any questions regarding the operation, maintenance, service or warranty of this water heater should be directed to the seller from whom it was purchased. If additional informa

1 Supersedes Form No. P11-763 PACKAGE HEAT PUMP UNITS RJNA- HIGH EFFICIENCY SERIES FORM NO. P11-763 REV. 1 Supersedes Form No. P11-763 PACKAGE HEAT PUMP UNITS RJNA- HIGH EFFICIENCY SERIES NOMINAL SIZES 3-5 TONS [10.6-17.6 kW] *Unit shown with optional louver panels installed. “CERTIFIED UNDER THE A.R.I. CERTIFICATION PROGRAM—A.R.I. STANDARD 240” ISO 9001:2000 TABLE OF CONTENTS TABLE OF CONTENTS Introduction .........................................................................................