When the PITCH CONTROL (24) is in the center position the speed will be close to 33 or 45 depending on which SPEED SELECTOR BUTTON (18) is pushed. 3. The PLATTER (2) is equipped with a STROBE RPM INDICATOR STRIP (26) and the POWER SWITCH (15) contains built in STROBE LIGHTS (27). When the PLATTER (2) is spinning, the STROBE LIGHTS (27) illuminate the STROBE RPM INDICATOR STRIP (26). The bottom row of dots will appear to be stationary when the speed of the platter is exactly 45 RPM. The second

The turntable PLATTER (2) will start to spin. 7. Push the CUE LEVER (19) to the "UP" position. 8. Position the tone arm over the desired groove on the record and push the CUE LEVER (19) to the "DOWN" position. The TONE ARM (5) will slowly lower onto the record at which time play will begin. Page 4 9. When play is over, raise the TONE ARM (5), move it to the ARM REST (9), and secure it with the ARM CLAMP (8). 10. You now have the option of turning off the power by turning the POWER SWITCH (1

Congratulations on purchasing a Gemini XL-500 II turntable. This state of CARTRIDGE INSTALLATION: (SEE FIG. 2) the art turntable includes the latest features. Prior to use, we suggest that Because all cartridges have their own designs, please refer to your you carefully read all the instructions. particular cartridge’s instructions to insure proper installation. Features • ±10% Pitch control • Braking for quick stops • Strobe illuminator • Soft-touch start/stop switch Precautions 1. Read all ope

standstill to 33 1/3 RPM Braking System........................................Electronic Brake (Solenoid) Wow and Flutter...................................................................0.02% WRMS* * This rating refers to the turntable assembly and platter only and excludes effects of records, cartridges or tonearms. Rumble........................................................................56 dB Unweighted TONEARM SECTION: Type...............................................Universal S-Sha

(5 kg) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE WEIGHT AND DIMENSIONS SHOWN ARE APPROXIMATE. INTERRUPTING PLAY: 1. Pushing the CUE LEVER (17) to the “UP” position will cause the TONE ARM (6) to lift stopping play. 2. Pushing the CUE LEVER (17) to the “DOWN” position will cause the TONE ARM (6) to slowly lower onto the record at the point where play was interrupted. PLAYING 45 RPM RECORDS: 1. When playing a 45 RPM record with a large center hole, first place the 45 ADAPTER (

The TONE ARM (7) will slowly lower onto the record at which time play will begin. 9. When play is over, raise the TONE ARM, move it to the ARM REST, and secure it with the ARM CLAMP. 10.You now have the option of turning off the power by turning the POWER (15) switch to the “OFF” position, or stopping the PLATTER (2) by pushing the START/STOP (17) button. INTERRUPTING PLAY: 1. Pushing the CUE LEVER (18) to the “UP” position will cause the TONE ARM (7) to lift stopping play. PLAYING 45 RPM R

The turntable PLATTER (2) will start to spin. 7. Push the CUE LEVER (19) to the "UP" position. Page 4 8. Position the tone arm over the desired groove on the record and push the CUE LEVER (19) to the "DOWN" position. The TONE ARM (5) will slowly lower onto the record at which time play will begin. 9. When play is over, raise the TONE ARM (5), move it to the ARM REST (9), and secure it with the ARM CLAMP (8). 10. You now have the option of turning off the power by turning the POWER SWITCH (1

XL-120MKU BELT-DRIVE MANUAL TURNTABLE MANUELLER PLATTENSPIELER MIT RIEMENANTRIEB GIRADISCOS MANUAL ACCIONADO POR CORREA TABLE TOURNANTE MANUELLE ENTRAÎNÉE PAR COURROIE MULTI-LANGUAGE CONTENTS: ENGLISH......................................................................................................................................................................................................................PAGE 5 DEUTSCH..................................................................

The horizontal zero (0) balance should be completed. 6. Refloat the TONE ARM (7) to ensure horizontal zero (0) balance. If zero balance has not been maintained, repeat counterweight steps 3-5. 7. After adjusting the horizontal zero (0) balance, turn the balanced COUNTERWEIGHT (9) counter clockwise until the cartridge manufacturer’s recommend stylus pressure appears on the STYLUS PRESSURE RING (12) where it meets the center line of the TONE ARM (7) rear shaft. ADJUSTING THE ANTI-SKATING CONTROL:

1 FOR PART NUMBERS AND LOCATIONS. VOLTAGE SELECTION: Rotate the PLATTER (2) until the VOLTAGE SELECTOR (3) (located on the TURNTABLE BASE (1)) is visible through one of the platter holes. Make sure that the VOLTAGE SELECTOR (3) switch is set to the correct voltage. WARNING: IF YOU TRY TO OPERATE THE TURNTABLE WITH THE INCORRECT VOLTAGE SETTING, IT CAN DAMAGE YOUR TURNTABLE. ATTACHING THE TURNTABLE BELT: The TURNTABLE BELT (4A) comes attached to the PLATTER (2) and the MOTOR SPINDLE (4B) bu